Author: Site Editor Publish Time: 10-10-2026 Origin: Site
The journal that matches the inner ring of the P0-level rolling bearing usually uses k6 (such as Φ55k6, Φ56k6), and adopts tolerance requirements; the journal that matches the gear is selected as r6 (interference) or n7 according to torque and accuracy; the output shaft end and the coupling are usually H7/k6 or H7/h6, and the specific tolerance zone is determined according to the product technical document or GB/T 1095-2003.
The journal diameter tolerance level is generally IT5~IT7. The journals that play a supporting role require higher precision (IT5~IT7), and the journals that assemble transmission parts require relatively lower precision (IT6~IT9).
The tolerance zone of the keyway width on the shaft is usually N9; the unspecified dimensional tolerance is generally implemented according to the medium level of GB/T 1804-m.
2. Geometric tolerance
The cylindricity of the journal that matches the inner ring of the bearing is usually 0.005mm (level 6); the radial circular runout of the journal where the bearing is installed relative to the public datum AB is usually 0.025mm (level 7); the circular runout of the shoulder positioning end face is usually 0.015mm (level 6); the symmetry of the keyway is generally level 7 to 9.
The shape accuracy such as straightness and roundness is generally controlled within 0.01mm, the axial/radial runout of the universal transmission shaft is controlled within 0.02mm, and the radial runout of the high-speed output shaft should be controlled within 0.01mm.
3. Surface roughness
The upper limit Ra of the journal that cooperates with the bearing and gear is usually 0.8 μm; the upper limit Ra of the shoulder positioning end face is 3.2 μm or 1.6 μm (depending on the specific end face); the upper limit Ra of the sealing contact surface is 1.6 μm.
More stringent occasions: the support journal Ra that matches the bearing is less than 0.8μm, and can be 0.63~0.16μm under high precision requirements; the shaft diameter Ra that matches the transmission part is 2.5~0.63μm.
Maintenance standards usually also require that the output shaft and rolling bearing must have a surface roughness of Ra0.8 and a matching tolerance of H7/k6, and the shaft and journal must not have cracks, burrs, or scratches.
4. Process tips
The grinding process is generally arranged after secondary surface processing such as splines, keyways, threads, etc., and after quenching treatment; the center holes at both ends are preferred for the positioning reference. Keyways, grooves, etc. should be completed after semi-finishing and before finishing to avoid bending deformation caused by large cutting forces after finishing.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?