Author: WeiGao Transmission Publish Time: 16-09-2021 Origin: WeiGao Transmission
The disadvantage of spur gear reducer compared with helical gear reducer is that they will produce vibration. Whether due to design, manufacturing or deformation, some changes of involute shape may occur along the whole tooth surface at the same time. This will lead to a regular, once per tooth contact, which is often very strong. The resulting vibration will not only cause large load on the gear, but also cause noise.
Another disadvantage of spur gear reducer is that in the contact time, sometimes the additional strength obtained by the meshing of two pairs of teeth can not be used, because the stress is limited by the meshing of single teeth in the cycle.
Then the helical gear reducer is different. Its helical gear can be regarded as a cylindrical gear formed by the dislocation of a group of thin plate gear. In this way, the contact of each plate is in different parts of the tooth profile, resulting in the function of compensating the error of each thin plate gear. This compensation function is very effective for the elasticity of the teeth, and it is also beneficial in terms of bearing strength.
Moreover, manufacturing and assembling a large number of thin straight gears is complex, difficult and uneconomical. Therefore, manufacturers Manufacture connected gears with teeth along the helix direction. Although helical gears are not like spur gears, they can cause poor axial forces. However, the advantages in reducing vibration and improving bearing strength are far better than the disadvantages caused by axial thrust and slightly increased manufacturing cost. Therefore, in the manufacturing of gear reducer, helical gear is mostly selected instead of spur gear.
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?