Author: Weigao Transmission Publish Time: 14-10-2021 Origin: 威高传动
The geared motor is a machine that combines the motor and the reducer into one.The advantage of geared motors lies in the organization of the power transmission.Use the gear speed for conversion, reduce the rotation number of the motor to the required number of rotations, and obtain a large torque carrier.
The motor of the geared motor generally adopts high-torque, low-speed transmission equipment, and the motor, internal combustion engine or other high-speed power is transmitted to the large gear of the gear reducer with a small number of teeth through the geared motor to achieve the purpose of deceleration.Ordinary geared motors will also achieve the same effect on gear reducers with the same principle.The ratio of the number of teeth of the gear size is the transmission ratio.
The principle of this reducer is:
1. Increase the output torque of the geared motor while reducing the speed.The torque output ratio should be multiplied by the motor output multiplied by the reduction ratio, but must not exceed the rated torque of the reducer.
2. Reduce the load inertia during deceleration, and the reduction of inertia is the square of the reduction ratio.Normally motors have an inertia value.
It is also convenient and quick to install, but you need to pay attention to:
The geared motor needs a stable voltage; the specifications are consistent with its design specifications; the appearance is free from damage and oil leakage; the fixed base is not loose; add lubricating grease, and the lubricating oil will not be changed for 12,000 hours; the current must not exceed the current value marked on the nameplate of the motor reducer; attention Ambient temperature, humidity, pH and other issues; correct installation, maintenance or operation; confirm that the mounting parts and transmission accessories are fixed; the motor reducer needs a grounding wire.
Offshore Wind Vessel Gearbox Market 2027: Crane and Winch Drive Demand
Lubrication and maintenance characteristics of B series industrial gearboxes
What are the common misunderstandings in B series gearbox maintenance?
Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor
How does the R series helical gear reducer perform in a strong vibration environment Selection
Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand
Pellet Mill Gearbox Selection: Ring Die Torque, Thermal Rating and VFD Restart
Is there any way to reduce the parallelism error of the reducer?
Food and Beverage Gearbox Market 2027: Renovation Demand and Mixer Sizing
Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake
What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?
How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal
Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand
What are the common problems with NGW42-25 planetary reducer base welding?
What kind of noise will the reducer produce if the box manufacturing accuracy is not up to standard?
Slewing Drive Solar Tracker Selection: Wind Load and Holding Torque
Which is more efficient, cycloidal pinwheel reducer or worm gear reducer?