The planetary reducer is a precision transmission device that mainly connects the motor and mechanical equipment.Its function is to achieve deceleration through the large gear on the output shaft, increase the torque of the motor, and is widely used in automation equipment.The materials of planetary reducer components are not all made of stainless steel.Over time, some important parts of the planetary reducer will rust.So, what is the part of the planetary reducer that is prone to rust?
1. Rotating shaft: The rotating shaft of the planetary reducer is mainly made of steel, which has a certain anti-rust performance, but a small amount of corrosion will still occur after long-term use.Corrosion will affect the connection tightness of the rotating shaft and the normal performance of the rotating shaft.Therefore, for safety reasons, it must be opened for rust removal or replacement.
2. Base: In order to stabilize the performance of planetary reducers, the bases of most planetary reducers on the market are made of pig iron.Therefore, once the anti-rust paint on the sprayed surface falls off, the water stains containing chemical agents and the corrosion of detergents will inevitably cause rust.So check regularly.For parts where the paint has come off, sand it down and repaint.
3. Drain pipe: The drain pipe of the planetary reducer is mainly made of large-diameter steel materials.After long-term contact with sewage, it is easy to rust and fall off in severe cases.Therefore, for this problem, we can re-select steel pipes of the same caliber for replacement, or entrust professional masters to re-weld.
4. Anchor bolts: Anchor bolts are the core components and grounding stability of the planetary reducer.Long-term contact with ground sewage is prone to rust and seriously affects stability.The best way to do this is to cut off the rusted foot bolts and replace them with new fixtures.The above content is the part of the planetary reducer that is prone to rust, and it needs to be paid attention to during use.
