There are some tips on using the reducer to make your reducer better:
1. After 200~300 hours of operation, the oil should be changed for the first time. In the future use, the quality of the oil should be checked regularly, and the oil mixed with impurities or deteriorated must be replaced in time.Under normal circumstances, for long-term continuous operation of the reducer, the new oil should be replaced according to 5000 hours of operation or once a year.The reducer should be filled with the same grade of oil as the original grade, and must not be mixed with oil of different grades. Oils of the same grade but with different viscosities are allowed to be mixed;
2. When changing the oil, wait for the reducer to cool down until there is no danger of burning, but it should still be kept warm, because after complete cooling, the viscosity of the oil will increase and it will be difficult to drain the oil.Note: Cut off the power supply of the transmission device to prevent unintentional power-on;
3. During work, if you find that the oil temperature rises above 80°C or the oil pool temperature exceeds 100°C or produces abnormal noise, you should stop using it, check the cause, eliminate the fault, and continue to run after replacing the lubricating oil. ;
4. The user should have reasonable rules and regulations for use and maintenance, and should carefully record the operation of the reducer and the problems found in it. The above regulations should be strictly implemented.
How to refuel the gearbox, 450 reducer parameters, Wuxi Jinjin Gearbox Co., Ltd., Changzhou Rexnord reducer, wornuer reducer
What kind of oil to add to the driving gearbox, reducer Hangzhou, 5gn gearbox, Guangdong zq reducer, hydromec reducer
