Reducers are applicable to all areas of our lives.It is usually used in transmission equipment with low speed and high torque.With the continuous development and growth of the reducer industry, reducers are used in more and more industries.How long is the service life of the reducer. During normal use, please pay attention to the maintenance of the reducer, which is very important to prolong the service life of the reducer.When the Reducer is first used, it needs to be replaced with new oil when it runs for 7-14 days.Frequent inspections should also be carried out during future use.If sunlight is found in the oil, it must be replaced at any time, or the gearbox cleaning and maintenance machine can effectively help us reduce the impurities in the reducer and greatly reduce the replacement time of the internal lubricating oil.For the long-term operation of the reducer, the new oil should be replaced every 2-3 months.If the operation is less than 8 hours per day, it should be replaced every 4-6 months.The reducer is not short of oil.Under normal operation, as long as it is maintained regularly, it will not break. With the development of technology, the power of the reducer is getting bigger and bigger, and the cost of testing is getting higher and higher.A large number of reducers are directly put into use without passing the test, so various failures usually occur in the actual use of the reducer, which brings some troubles to maintenance and schedule guarantees, and leads to huge economic losses.Considering these conditions, the performance test of the reducer is of great significance.The appearance of the accelerated life test of the reducer solves these problems to a certain extent. The main method of accelerated life test is to statistically analyze the power change data of the reducer and determine the corresponding load spectrum.Then use the acceleration load spectrum to customize the acceleration load spectrum *** Then use the acceleration load spectrum to carry out relevant load tests on the reducer, and obtain the damage type and quantity of the actual reducer and the test reducer are very consistent.Only through regular overhaul, the machine can last a long time with long service life.
