Application and precautions of RX67 reduction motor in garbage disposal equipment

1. Application scenarios of RX67 reduction motor

1. Garbage compactor

At garbage transfer stations, garbage compactors are used to compress loose garbage into compact blocks to reduce volume and facilitate transportation and subsequent processing. RX67
The reduction motor provides powerful torque and stable speed control to the compression mechanism of the compressor. For example, the garbage compactor used by a large garbage transfer station in a certain city is equipped with RX67
The geared motor can efficiently compress a large amount of garbage, improve the efficiency of garbage disposal, and reduce the number of transportation times and costs.

2. Waste incinerator feeding device

Waste incinerators require uniform and stable feeding to ensure sufficient and stable combustion. The RX67 reduction motor drives the conveying mechanism of the feeding device to accurately control the feeding speed. At a waste-to-energy plant, RX67
The geared motor ensures that garbage can enter the incinerator at the set speed and amount, ensuring the stability and efficiency of the incineration process while reducing pollutant emissions.

3. Garbage classification and screening equipment

It is used to drive the rotation and vibration of the screening mechanism to classify garbage of different sizes and types. In a modern waste sorting and treatment plant, RX67
The geared motor enables the screening equipment to accurately separate recyclables, organic matter and other waste, improving the accuracy and efficiency of waste classification.

2. Precautions for RX67 reduction motor

1. Load matching

Choose the appropriate RX67 according to the actual load of the garbage disposal equipment
Geared motor model and parameters. For example, in a large garbage compactor, if the selected reduction motor has insufficient torque, it may result in poor compression results or even damage to the motor. A certain garbage treatment plant had problems with motor overheating and frequent failures due to improper load matching in the early stages. Later, it was reSelection replaced with a more suitable one.
RX67 reduction motor solved the problem.

2. Protection and sealing

The garbage disposal environment is usually harsh, with garbage debris, dust, sewage, etc. RX67
The geared motor needs to have good protection level and sealing performance to prevent foreign matter from entering the motor and affecting normal operation. In an open-air garbage disposal site, due to insufficient motor protection, rainwater and dust entered the motor, causing the motor to short-circuit. Later it was replaced with one with a higher protection level and better sealing.
RX67 reduction motor avoids similar problems from happening again.

3. Lubrication and maintenance

Check and replace lubricating oil regularly to ensure good lubrication of the internal parts of the motor. At the same time, it is necessary to strengthen daily maintenance and clean up the garbage and dirt on the surface of the motor in time. RX67 used in the feeding device of a waste incineration plant
The reduction motor has not been lubricated and maintained for a long time, resulting in serious gear wear and affecting the normal operation of the equipment. After enhanced maintenance, the service life of the motor has been significantly extended.

4. Noise control

In some places with strict noise requirements, such as garbage disposal stations near residential areas, the RX67 with lower noise should be selected.
reduce the motor or take noise reduction measures. For example, by installing soundproof covers and optimizing the motor structure, we can reduce the noise generated by the motor during operation and reduce the impact on the surrounding environment.

5. Installation and debugging

Correct installation and commissioning for RX67
The performance and life of the geared motor are crucial. It is necessary to ensure that the connection between the motor and the equipment is firm and the coaxiality is good to avoid increased vibration and noise caused by improper installation. In a newly constructed garbage disposal project, as the installer was installing
The RX67 geared motor was not accurately calibrated, resulting in abnormal vibration and noise during operation. After reinstallation and debugging, normal operation was restored.