ZQA500-15.75-1 There is no fixed standard for the replacement cycle of the sealing structure of the soft tooth surface reducer. It is usually affected by factors such as working environment and load conditions. It needs to be determined in combination with multiple factors. The following is a specific analysis:
Working environment : If the reducer is in a clean and dry environment, the sealing structure has a relatively long service life and may be replaced every 2-3 years. If the working environment is humid, dusty or corrosive, the sealing structure is prone to aging and damage and may require replacement every year or more frequently.
Load conditions : Under light load conditions, the sealing structure has less wear and a longer service life. Under heavy load conditions, the sealing structure bears greater pressure and friction, wear faster, and the replacement cycle will be shortened accordingly, and it may require more frequent replacement.
Maintenance : If you can check the status of the sealing structure regularly, promptly detect leakage, deformation or aging, and regularly replace lubricant and clean the filter, it can extend the service life of the sealing structure. On the contrary, if the maintenance is improper, the seal structure may fail early and need to be replaced earlier.
In addition, you can also refer to the reducer's user manual to determine the seal structure replacement cycle, which usually has recommended values given by the manufacturer in the manual. At the same time, it is recommended to check the seal structure status after 100 hours of initial use of the reducer and replace it in time if necessary. In routine use, it can be checked every 1000-2000 hours or once a year. If the sealing structure is found to have leakage, cracks, deformation, etc., it should be replaced immediately.
