BWED141-2537-1.1KW The lubrication system of the cycloid pin wheel reducer is too low, which will have adverse effects on the lubrication, heat dissipation and other aspects of the equipment. The specific details are as follows:
Inadequate lubrication, accelerated wear : the gears, bearings and other key components inside the reducer need to be fully lubricated during operation. When the oil volume is too low, the lubricating oil cannot fully cover the contact surface of these components, which will lead to increased friction and accelerate wear of the components. Severe insufficient lubrication may also cause dry friction, causing scratches, strains and other damage to the surface of the component, greatly reducing the service life of the component.
Poor heat dissipation and rising temperature : lubricating oil not only plays a lubricating role, but also takes away the heat generated during the operation of the reducer. Too low oil will reduce the heat dissipation area and reduce the heat dissipation efficiency. Under normal circumstances, the oil temperature during the reducer operation may be maintained at 60-80℃, but when the oil volume is too low, the oil temperature may rise to 90℃ or even higher. Long-term high temperature environment will cause the seals inside the reducer to age and deform, further affecting the sealing performance, leading to lubricant leakage, forming a vicious cycle.
Increase noise and vibration : Due to insufficient lubrication, friction between components increases, and greater noise and vibration will be generated during operation. This will not only affect the working environment, but may also reflect problems such as intensifying wear of internal components of the equipment. In the long run, it may lead to equipment failures, affecting the normal operation and production efficiency of the equipment.
