The other components of XLED8075-A-273-0.18KW cycloid pin wheel reducer are as follows:
Appearance and installation dimensions : According to the relevant parameters of the 8000 series cycloid pin wheel reducer, in Dimensions with the base number of 8075A, D₂ is 120mm, L₁ is 178mm, and CF is 91mm. In the installation size, D₃ is 102mm, D₄ is 80mm, P is 3mm, E is 8mm, M is 34mm, and nd is 6-9.
Shaft size : In terms of output shaft size, D is 14mm, e is 25mm, b is 5mm, h is 16mm, and t is 13.5mm. In terms of input shaft size, D₁ is 11mm, e₁ is 12mm, b₁ is 25mm, h₁ is 4mm, and t₁ is 9.5mm.
Transmission ratio : In this reducer model, '273' usually represents the transmission ratio, that is, its transmission ratio is 273. Generally speaking, the transmission ratio range of the 8000 series cycloid pin wheel reducer during the second stage deceleration is 1/99-1/7569, and this model is within this range.
Output torque : It can be calculated according to the formula 'reducer torque = 9550× motor power ÷ motor power input rotation number × speed ratio ×' using coefficient', assuming that the motor input rotation number is 1500r/min, and using coefficients to take 1, the theoretical output torque can be calculated to be about 26.7Nm. The actual output torque will vary due to factors such as the usage coefficient. Usually, the output torque range of the 8000 series cycloidal pin wheel reducer is between 20Nm-60800Nm.
Transmission efficiency : Due to rolling engagement, the secondary transmission efficiency can usually reach more than 88%.
