During operation, the cycloidal reducer will cause the temperature of the machine, but usually the heat of the working geared motor is limited.If it exceeds a certain height, it means that there is a problem and should be dealt with in time.The reason we want to inform us here is why the heat reduction of a type ring reducer in the electric motor is too high.
1. Lubricating oil problem.In other words, this problem occurs when there is a shortage of lubricating oil, so the lubricating oil must be added or replaced.
2. There is a problem with the bearing.At this point, it needs repair and replacement.
3. Problems with new machine equipment, that is, the new machine presents a problem and needs to be reviewed before it can be dealt with.
If the cycloidal pin gear reducer is heated in use and the temperature is too high, it is usually said that there may be a problem with the eccentric bearing.Of course, this is only a general situation and other factors should be considered.For example, a newly purchased machine may have improper assembly or problems.
Of course, this kind of knowledge is the first reaction in the mind after discovering the temperature failure of the reducer, but it does not mean that the problem comes from this reason.Regarding the temperature problem of the cycloidal pin reducer, another important factor that needs to be considered may be the problem of lubricating oil.If the reducer is short of lubricating oil, the above problems may also exist.
This requires adapting remedies to the case and adapting measures to local conditions.Of course, there are other reasons to consider.If the cycloid reducer is often operated under overload, it may also cause the temperature to be too high.However, these factors need to be continuously analyzed, eliminated and selected to find the correct answer.Found the reason why the temperature of the cycloidal pin reducer is too high, and then solved it.
This belongs to the basic theory of reducer technology, which will not be too much here.For the high temperature problem of the thermal insulation ring pin gear reducer, first find out the cause, such as the above-mentioned possibility.If these causes are eliminated, find other factors that may affect the temperature of the reducer, then apply medicine to the case, provide solutions and implement them.By doing this, it is easy to handle the failure of the reducer.
