The parallel shaft helical gear reducer consists of two or three stages of helical gears, which are related to the reduction ratio and installed in the same frame.There are a total of 11 parallel shaft helical gear reducers with a torque scale ranging from 3 to 22500Nm.The maximum output power of the motor is 200kW.Parallel shaft helical gear reducers have transmission ratios from i = 3.77 to i = 31434. Particularly low output speeds can be achieved (multi-stage reducers with additional helical gear input stages). The product is widely used in light industry, food, beer and beverage, chemical industry, escalator, automatic storage equipment, construction, machinery, iron and steel metallurgy, papermaking, wooden panel machinery, automobile manufacturing, tobacco machinery, water conservancy, printing and packaging, pharmacy , textiles, building materials, logistics, feeding machinery, environmental protection and other fields. Cut off the power supply to the geared motor to avoid electric shock!Wait for the reducer to cool down!For gear units with oil level plug: Unscrew the oil level plug, check the oil fill level and, if necessary, screw in the oil level in the oil level plug.Check the lubricating oil and cut off the power to the reduction motor to avoid electric shock!Wait for the reducer to cool down! Unscrew the oil level plug and remove some sample oil.Check the continuity of the lubricating oil.If the lubricating oil appears to be contaminated, it is recommended to change the lubricating oil immediately.For reducers equipped with an oil level plug, open the oil level plug, check the oil filling height, add lubricating oil if necessary, and tighten in the oil level plug.
