Cycloid reducer refers to the cycloid reducer with vertical / horizontal assembly method, usually fixed by flange. Part of it is divided into qj-l series, which is mainly used in crane operation equipment, as well as in the operation equipment of various types of mechanical equipment such as logistics and transportation, metallurgical industry, mining, chemical industry and textile industry. The gear and gear shaft adopt medium carbon diamond medium hard tooth surface, which has the advantages of compact structure and high bearing capacity. It is another new product launched after ZSC and ZSC (a) reducers.
There are four main factors for the scalding and oil leakage fault of cycloid reducer:
1： Whether the matching of materials is reasonable. Every cycloid reducer has its important parts, the most important: gear, bearing and oil seal. When such spare parts are not manufactured with superior materials and advanced technology. The quality of your equipment is difficult to guarantee.
2： Surface quality of meshing friction surface: because it is sliding friction transmission, more heat will be generated during operation, resulting in difference in thermal expansion between parts and seals of cycloid reducer, so as to form a gap on each mating surface, and the lubricating oil becomes thinner due to the increase of temperature, which is easy to cause leakage.
3： Whether the selection and addition amount of lubricating oil are correct. When it exceeds a certain amount, that is, you do not add it according to the oil gauge.
4： Assembly quality and application work environment. If your working environment is very bad, you may need to consider a specific model of cycloid reducer or other types of cycloid reducer.
