Author: Site Editor Publish Time: 31-08-2022 Origin: Site
The standard IPX of the international industrial production waterproof level is the same as the JIS level of the American manufacturing groundwater level waterproof standard, divided into 9 levels 0-8, and recorded here.
Level 0 unprotected;
Level 1 also eliminates the harmful effects of vertically falling water droplets;
Level 2: It has the safety protection function of reducing water droplets within 15 degrees from the vertical angle;
Level 3 also eliminates the harmful effects of water spray droplets at a vertical angle of 60 degrees;
Level 4 also eliminates the harmful effects of water droplets splashed from other directions;
Level 5 also eliminates the harmful consequences of the volume of water ejected from the nozzle in all directions;
Level 6 also eliminates the harmful and adverse effects of super-strong water discharge from nozzles in all directions;
The top of level 7 is 0.15-1 m from the water surface and lasts for 30 minutes.Service performance was unaffected and there were no water leaks.
The top of level 8 is 1.5-30m from the water surface and lasts for 30 minutes.Service performance was not adversely affected and there were no water leaks.
In the future, you should look out for three proofing phones to buy.Only people with levels 7 and 8 are really waterproof; level 6 can also be called rainproof.Cell phones and GPs used for outdoor activities should be at this level.
The hidden impact of the lubrication method of the cutting machine reducer on the life and accuracy
How to determine the installation direction of ZSY gear reducer backstop
What are the specific consequences if the backstop of the ZSY reducer is installed upside down?
How to solve the problem of broken shaft of planetary reducer
Is the reducer noisy? Find the reasons from gear modification to box design
Full analysis of lathe reducer installation: misalignment is an accuracy killer!
What are the steps to adjust the oil level of DCY gear reducer?
What are the fracture characteristics of fatigue fracture of ZSY reducer spline shaft?
How to replace the internal parts of WB micro cycloidal reducer
How to judge whether the arm bearing of WB micro cycloid reducer needs to be replaced
Three major causes of overload failure of palletizer reducer
How to reduce the impact of low temperature environment on SAF series reducer
Do KAF series reducer bearings need special protection in low temperature environments?
Idle storage and restart operation and maintenance specifications of sizing machine reducer
The hidden impact of speed ratio matching of sizing machine reducer on yarn quality
What are the key points for disassembly and inspection of ZL35 soft tooth surface gear reducer?
Is the temperature of the granulator reducer too high and the power insufficient?
Practical tips for reducing costs and increasing efficiency of bending machine reducers
How to ensure the accuracy of the planetary reducer frame after welding
How to choose a reducer for small and medium-sized briquetting machines?
The ball press reducer is stuck and won't rotate? Cause of failure + quick solution