Oil leakage of planetary gear reducers is a common problem.In the long run, it will increase the cost of the enterprise, cause equipment damage, and easily cause some production accidents.Therefore, it is also very important to reduce the leakage of the planetary gear reducer.What is the treatment method of the planetary gear reducer oil leaker? 1. Surface treatment Extend the oil spill 1 cm to the sides, make a metal primary with a grinder, and clean it with alcohol or acetone. 2. Mixed materials Mix in proportion and stir until there is no color difference. 3. Paint This is a common method.Repair with repair materials first.After confirming that there are no leaks, cover with rubber polymer repair and protection material. 4. Solidification 8 hours / 24°C (material temperature).Moisture at room temperature can be used to accelerate material curing The maintenance operation of the planetary gear reducer is related to the development of the enterprise.Leakage not only wastes resources, but also increases maintenance intensity.Therefore, relevant measures must be taken to reduce the leakage and vibration of the planetary gear reducer, improve operational efficiency, and reduce the maintenance and operating costs of the enterprise.
