1. The product adopts the design idea of serialization and modularization, and has wide adaptability.This series of products has a large number of motor combinations, installation locations and structural schemes, and the transmission rate is subdivided to meet different operating conditions and realize electromechanical integration.
2. R series helical gear reducers with hard teeth surfaces are manufactured according to international technical requirements, with high scientific and technical content;
3. Hard teeth reduce space, reliable and durable, with high overload bearing capacity, and the power can reach 132kW;
4. Low energy consumption, excellent performance, reducing efficiency up to 95%;
5. Low vibration, low noise and high energy saving;
6. The R series helical gear reducer with hard tooth surface is made of high quality forged steel and steel cast iron box.The gear surface is subjected to high-frequency heat treatment;
7. After precise machining, ensure shaft parallelism and positioning bearing requirements.The reducer forming the helical gear transmission assembly is equipped with various types of electric motors, which are combined into mechatronics, fully ensuring the quality characteristics of the reduced product.
Features:
1. Offset output, compact structure, maximum use of box space, two and three stages in the same box.
2. It adopts integral casting box, which has good structural rigidity, which can easily improve the strength of the shaft and the service life of the bearing.
3. Installation method: Foot installation and flange installation have large and small flanges, which are easy to choose.
4. Solid shaft output with an average efficiency of 96% for the second stage, 94% for the third stage, and 85% for the R/R combination.
5. RM series specially designed for mixing can have larger axial and radial force.
