Every brand of vertical reducer may leak oil.Of course, no one wants their retarders to leak oil, but there are always some coincidences.Sometimes there are some problems with the product itself, sometimes it is misused, or the related needs are not clearly stated during procurement.Of course, the most important thing is that we can't buy some products produced by small manufacturers without rigorous testing, in order to save costs.When your equipment is running, you feel the heartache when you see oil leaks every day.When the production line is running normally, it can generate hundreds of thousands of profits every day, and you have to stop the production line for several hours to change the reducer, and you will know that there is no medicine for regret in the world. In order to improve the efficiency of the vertical reducer, non-ferrous metals are usually used as gears, and the worm is made of hard steel.Because it is a sliding friction transmission, it will generate high heat during operation, resulting in differences in thermal expansion between various components and reducer seals, causing gaps on various mating surfaces, and thinning of the oil due to the increase in temperature , which can easily cause leakage. There are four main reasons, 1: Whether the material is reasonable.Every reducer has its vital components, the most important: gears, bearings and oil seals.When these accessories are not produced with high-quality materials and advanced technology.The quality of your device cannot be guaranteed. 2: is the surface quality of the mating friction surface: due to the sliding friction transmission, more heat will be generated during operation, which will cause the difference in thermal expansion between the various parts of the reducer and the seal, thus forming a gap on each mating surface, As the temperature increases, the lubricating oil becomes thinner, which tends to cause leakage. 3: It is the choice of lubricating oil and whether the amount added is correct.When it's over a certain amount, ie, you don't add it according to the oil table. 4: It is the assembly quality and use environment.When your environment is dire, you may want to consider a special vertical reducer model.or other types of reducers.
