Mechanical equipment damage forms of worm gear reducer:
1. Accident damage: Equipment damage caused by improper operation, poor maintenance or design defects is man-made damage and can be avoided.
2. Natural damage is also called normal wear and tear. It is caused by the long-term effects of friction, high temperature and corrosion during the normal use of the equipment. Cause analysis: Wear caused by friction: There are four common situations: oxidation wear, friction heat wear, hard particle wear, and spot wear. Corrosion wear.
The worm gear reducer housing is an important indicator related to the appearance of the reducer and the quality of the product:
1. The reducer shell is thin and the product is prone to breakage, causing oil leakage, insufficient lubrication, and poor heat dissipation, which affects the use of the reducer.
2. Trachoma on the reducer housing will also cause the above problems, but the speed will be slower.
3. The primer of the reducer housing must be done well. This is one of the important links to prevent rust and oil leakage of the reducer housing. What should be paid attention to when priming the housing is the appearance.
4. Do not hit the reducer casing with a heavy hammer, let alone drop it heavily.
Worm gear reducer oil level monitoring work:
1. Cut off the power supply to prevent electric shock. Wait for the reducer to cool down.
2. Remove the oil level plug and check whether the oil is full.
3. Install the oil level plug.
4. Open the oil drain plug and take an oil sample.
5. Check the viscosity index of the oil
6. If the oil is obviously turbid, it is recommended to replace it as soon as possible.
