Worn, pitted and bonded worm gear reducers can be replaced and corrected, and worms can be machined from scratch.The combination of worm gear and worm gear tooth surface is smooth, pitting and single tooth surface defects can be corrected by repair welding, milling, scraping and grinding.
1. Remove the fairing system
Remove the lock nut of the worm wheel, remove the worm wheel with a special tool, and check the meshing condition of the worm and the worm wheel, including the direction of the contact surface, wear, etc.
2. Remove the worm gear reducer
The belt cover, pulley, V-belt, bolts, disassembly and assembly of the coupling and the base hanger motor of the cycloid reducer are disassembled.
3. And axis
The wear of the journal can be corrected by spraying, brushing and grinding after electroplating.If the keyway on the shaft is damaged, machine the keyway at the corresponding position of the original keyway.
4. Remove the worm gear reducer
Remove the pulley, cover, V-belt, coupling, and bolts to facilitate hanging the motor.In my country, gear reducers are widely used in the rotary mechanism of tower crane machinery in the fields of mining, metallurgy, construction, lifting, transportation, cement, textile, printing and dyeing, and pharmaceuticals.Remove the bolts at both ends of the worm cover and the splitter surface of the reducer, lift the upper cover of the casing, and place it on the rubber plate.Avoid damage and check for oil leaks.
5. Clean and deburr the parts before installation, and check the size, shape accuracy, surface roughness, etc. according to the drawings.The cycloid reducer is a planetary transmission principle.All transmissions of the cycloid reducer can be divided into three parts: input, reduction and output.
