WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News

News Center

  • Introduction to running-in of worm gear reducer

    2021-09-28

    The worm gear reducer needs to be run-in during use, and there will naturally be some problems during the run-in, which are roughly as follows: 1.The worm gear reducer wears quickly due to the processing and preparation of the components and control elements of the new reducer unit, synergistically Read More
  • Brief introduction on running in of worm gear reducer

    2021-09-28

    The worm gear reducer needs to be run in when it is used, and naturally there will be some problems for running in, which are roughly as follows.1. The worm gear reducer wears quicklyDue to the processing and preparation of components and control elements of the new reducer device, the collaborative Read More
  • Analysis of Heating Possibility of Cycloidal Pinwheel Reducer

    2021-09-28

    The cycloid reducer is an important part of the reducer.Generally speaking, there may be failure factors in the reduction gear.One of them is that the cycloid reducer device generates heat.What approach should we take to solve this problem?What is the likely impact on reduction if no action is taken? Read More
  • Analysis on the possibility of heating of cycloidal pinwheel reducer

    2021-09-28

    Cycloid pinwheel reducer is an important part of the reducer. Generally speaking, the reducer device may have fault factors. One of them is that the cycloid pinwheel reducer device is heating. What methods should we take to solve this? If no measures are taken, what effects may be caused to the redu Read More
  • Operation and maintenance elements of gear reducer

    2021-09-27

    When using the gear reducer, we need to make some preparations. For these key points and preparation points in operation, let's talk to you.1. Before the gear reducer device is used, the shaft assembly needs to be cleaned, and the collision, pollutants and how to clean the shaft assembly need to be Read More
  • Operation and maintenance elements of gear reducer

    2021-09-27

    When using a gear reducer, we need to do some preparations.Let's talk about the key points and preparation points in these operations.1.Before the gear reduction unit is used, the shaft assembly needs to be cleaned, and it is necessary to understand the collision, pollutants and how to clean the shaft assembly. Read More
  • Total 517 pages  Go to Page
  • Go

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK