WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News

News Center

  • The ability of worm gear reducer to control precision

    2021-09-28

    In the past, when the worm gear reducer was used for braking, many places did not understand the precision control elements of the worm gear reducer, so some semi-automatic procedures were needed to complete the automation.In order to improve automation efficiency, the worm gear reducer needs Read More
  • The ability of worm gear reducer to control the degree of accuracy

    2021-09-28

    In the past, when using the braking of the worm gear reducer, many places did not understand the accuracy control elements of the worm gear reducer, so some semi-automatic procedures need to be used to complete automation. In order to improve the automation efficiency, the worm gear reducer needs to Read More
  • Introduction to running-in of worm gear reducer

    2021-09-28

    The worm gear reducer needs to be run-in during use, and there will naturally be some problems during the run-in, which are roughly as follows: 1.The worm gear reducer wears quickly due to the processing and preparation of the components and control elements of the new reducer unit, synergistically Read More
  • Brief introduction on running in of worm gear reducer

    2021-09-28

    The worm gear reducer needs to be run in when it is used, and naturally there will be some problems for running in, which are roughly as follows.1. The worm gear reducer wears quicklyDue to the processing and preparation of components and control elements of the new reducer device, the collaborative Read More
  • Analysis of Heating Possibility of Cycloidal Pinwheel Reducer

    2021-09-28

    The cycloid reducer is an important part of the reducer.Generally speaking, there may be failure factors in the reduction gear.One of them is that the cycloid reducer device generates heat.What approach should we take to solve this problem?What is the likely impact on reduction if no action is taken? Read More
  • Analysis on the possibility of heating of cycloidal pinwheel reducer

    2021-09-28

    Cycloid pinwheel reducer is an important part of the reducer. Generally speaking, the reducer device may have fault factors. One of them is that the cycloid pinwheel reducer device is heating. What methods should we take to solve this? If no measures are taken, what effects may be caused to the redu Read More
  • Total 516 pages  Go to Page
  • Go

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK