The parallel shaft helical gear reducer is composed of two-stage or three-stage helical gears, which is related to the reduction ratio and is installed in the same box. There are 11 parallel shaft helical gear reducers in total, and the torque scale ranges from 3 to 22500nm. The large output power of the motor is 200kW. The transmission ratio scale of parallel shaft helical gear reducer ranges from I = 3.77 to I = 31434. Particularly low output speeds can be achieved (multi-stage reducer with additional helical gear input stage). The products are widely used in light industry, food, beer and beverage, chemical industry, escalator, automatic storage equipment, construction, machinery, iron and steel metallurgy, papermaking, wood-based panel machinery, car manufacturing, tobacco machinery, water conservancy, printing and packaging, pharmacy, textile, building materials, logistics, feeding machinery, environmental protection and other fields. Cut off the power supply of the reduction motor to avoid electric shock! Wait for the reducer to cool down! For reducer equipped with oil level plug: unscrew the oil level plug, check the oil filling height, supplement lubricating oil if necessary, and screw in the oil level plug. Check the lubricating oil and cut off the power supply of the reduction motor to avoid electric shock! Wait for the reducer to cool down! Unscrew the oil level plug and take out some sample oil. Check the continuity of the lubricating oil. If the lubricating oil appears to be contaminated, it is recommended to replace the lubricating oil immediately. For the reducer equipped with oil level plug, open the oil level plug, check the oil filling height, replenish lubricating oil if necessary, and screw in the oil level plug.
