1. The product adopts the design idea of serialization and modularization, which has a wide range of adaptability. This series of products have a great number of motor combinations, installation positions and structural schemes, and the transmission ratio is finely graded to meet different operating conditions and realize electromechanical integration.
2. R series helical gear reducer with hard tooth surface is manufactured in accordance with international technical requirements, with high scientific and technological content;
3. Hard tooth reducer saves space, is reliable and durable, has high overload bearing capacity, and the power can reach 132kw;
4. Low energy consumption, superior performance, reducer efficiency up to 95%;
5. Low vibration, low noise and high energy saving;
6. R series helical gear reducer with hard tooth surface is made of high-quality forged steel and steel cast iron box. The gear surface is subject to high-frequency heat treatment;
7. After precision machining, the shaft parallelism and positioning bearing requirements are ensured. The reducer forming the helical gear transmission assembly is equipped with various types of motors, which are combined into mechatronics, completely ensuring the quality characteristics of the reducer products.
Performance characteristics:
1. Small offset output, compact structure, maximum use of box space, two and three stages in the same box.
2. The integral casting box is adopted, with good structural rigidity, which is easy to improve the strength of the shaft and the service life of the bearing.
3. Installation method: foot installation and flange installation have large and small flanges, which are easy to choose.
4. Solid shaft output, the average efficiency is 96% for the second stage, 94% for the third stage, and 85% for the r/r combination.
5. The RM series specially designed for mixing can bear large axial and radial forces.
