With the further development of China's machinery industry, more and more users are using geared motors, although the universal application of geared motors in many mechanical equipment has been widely recognized.However, there are still many users who have never been in contact with geared motors who know little about geared motors and think that a simple transmission structure can achieve the function of geared motors, but this is not entirely the case.
1. Adding a deceleration motor can reduce the moment of inertia, generally the square of the speed ratio reduces, and can control the start, stop and speed change in time.
2. The increased torque through the geared motor is equivalent to increased input power, which can reduce the power required by the input motor (in the case of speed regulation). Generally, the motor is expensive, so the geared motor is considered.
3. The deceleration motor has the function of protecting the motor during transmission. The decelerator bears a large torque during operation. When it is overloaded, only the value of the overload divided by the reduction ratio is transmitted to the motor. If it is directly borne by the motor, it may cause damage to the motor.
4. The reducer motor will be damaged first when the overload is very large, and the reducer can be restored to use only by replacing spare parts, and the cost is relatively low. If the motor is directly damaged, the maintenance is relatively slow and the cost is also high.
