WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News

News Center

  • How to solve the problem of broken shaft of planetary reducer

    2021-10-13

    There are many kinds of reducers: cycloidal reducer, vertical reducer and planetary reducer.The following is the solution to the broken shaft of the planetary reducer.When the drive of the geared motor and the concentricity of the planetary reducer are assembled together, only the rotating p Read More
  • The elevator door must be practical cycloidal pin wheel reducer, otherwise safety accidents will occur

    2021-10-13

    After pressing the button, the door of the elevator will open slowly. When you click the close button, it will close slowly. The reason why it is slow is that it is not closed instantaneously, or because the cycloidal needle wheel reducer is installed inside the elevator. This kind of equipment is w Read More
  • The elevator door must be a practical cycloid reducer, otherwise safety accidents will occur

    2021-10-13

    After pressing the button, the elevator doors will slowly open.When you click the close button, it will close slowly.The reason why it is slow is that it does not close instantly, or because a cycloidal pinwheel reducer is installed inside the elevator.This device is w Read More
  • Analysis of common faults of reduction motor

    2021-10-12

    1、 Reducer overheating1) the lubricating oil is insufficient or excessive, and the oil and oil star vent cap are not loosened according to the product operation manual2) over current protection or load overload of cycloidal pinwheel reducer, check the overload reason of reduction motor, adjust it to Read More
  • Analysis of common faults of geared motors

    2021-10-12

    1. The reducer is overheated 1) Insufficient or excessive lubricating oil, and the oil and oil star exhaust caps are not loosened according to the product operation manual 2) Overcurrent protection or load overload of the cycloidal pinwheel reducer, check the cause of the overload of the reducer motor, and adjust it for Read More
  • Knowledge of worm gear reducer

    2021-10-12

    Worm gear reducer is a kind of power transmission mechanism, which uses the speed converter of gear to reduce the rotation number of motor to the required rotation number and obtain a large torque. Among the mechanisms used to transmit power and motion, reducer is widely used.The basic structure of Read More
  • Total 517 pages  Go to Page
  • Go

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK