WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News

News Center

  • Advantages of geared motors

    2021-10-14

    The geared motor is a machine that combines the motor and the reducer into one.The advantage of geared motors lies in the organization of the power transmission.The gear speed is used for conversion, reducing the number of revolutions of the motor to the required number of revolutions, and obtaining a carrier of high torque Read More
  • Advantages of reducer motor

    2021-10-14

    The reducer motor is a machine integrating the motor and reducer. The advantage of the reducer motor is the power transmission organization structure. The gear speed is used for conversion to reduce the rotation number of the motor to the required rotation number and obtain the carrier of large torq Read More
  • How to avoid geared motor burning

    2021-10-14

    Gear motor is one of the main equipment in industrial and agricultural production.Combustion events of gear reducers happen from time to time.In order to avoid this phenomenon in the gear reducer, the effective protective measures are as follows: keep the geared motor clean.in operation Read More
  • How to avoid combustion of reducer motor

    2021-10-14

    Reducer motor is one of the main equipment in industrial and agricultural production. Combustion events of gear reducer occur from time to time. In order to avoid this phenomenon of gear reducer, effective protective measures are as follows:Keep the reduction motor clean. During the operation of the Read More
  • The repair method of the bearing seat of the cycloid reducer of the crane

    2021-10-13

    After the truck crane is used for a long time, abnormal noise, heat, oil leakage, etc. will appear in the deceleration of the cycloidal pin wheel.The wear and tear of the bearing seat and the shedding of the outer ring of the bearing indicate that the reducer casing is made of cast steel and has poor wear resistance. Read More
  • Repair method of bearing seat of cycloidal needle wheel reducer of crane

    2021-10-13

    After the long-term use of truck crane, the cycloid needle wheel deceleration will have abnormal noise, heating, oil leakage and other conditions. The wear and fracture of the bearing seat and the falling off of the bearing outer ring indicate that the reducer shell is made of cast steel with poor w Read More
  • Total 517 pages  Go to Page
  • Go

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK