WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News

News Center

  • The size difference between K series bevel gear reducer from K37 to K187 is 1121mm!

    2024-03-08

    The K series reducer is the only bevel gear series reducer among the four major series of reducers.The essential difference between it and other reducers is its internal gear structure.The gear structure inside is a bevel gear, and this bevel gear structure can only be used for vertical output.Therefore, its output mode is right-angle output, that is, the angle formed by the output shaft and the input shaft of the reducer is 90°.The K series reducer and the S series reducer are very similar in appearance. They are similar in appearance, but the internal structure is different. The inner structure of the S series reducer is that of a helical-turbine reducer.Only by taking apart the structures inside and comparing them can we better distinguish their essences.There are basically 10 types of K series bevel gear reducers equipped with ordinary motors. Physical pictures of K series reducers. The reducers of this series are all foot-mounted.They are GK...foot-mounted helical and bevel gear reducers, GKA...B-foot empty Read More
  • The composition and testing method of no-load loss of asynchronous motor on FA27 reducer

    2024-03-08

    The composition and test method of no-load loss of asynchronous motor on FA27 reducer.When a newly purchased reducer or gear reduction motor is purchased, a no-load test is usually performed.Today, let’s take a look at what should be done during the no-load experiment. What part constitutes the loss of the FA27 reducer? Let’s see how it is tested?The motor no-load test is a very important test in the motor type test. It refers to a test in which the motor has no effective power output at its shaft end when it is running as a no-load motor.The no-load loss is obtained from the no-load test and mainly includes iron loss and wind friction loss.1. Test method for no-load loss of asynchronous motor The test is conducted at the rated frequency of the gear reduction motor and when the rotor shaft is not loaded.Adjust the stator terminal voltage to gradually reduce the stator terminal voltage from about 1.25 rated voltage U1 until the slip rate increases significantly and the no-load current reaches the minimum.Each time, the stator phase voltage U1, no-load phase current I0 and no-load phase current I0 are measured. Read More
  • Application range of dcy vertical axis hard tooth surface gear reducer

    2024-03-07

    DCY vertical axis hard tooth surface gear reducer has a very wide range of applications and is mainly used in various mechanical transmission occasions, such as the transmission of conveyors, mixers, cooling towers, compressors, water pumps, fans, crushers, coal mills and other equipment and slow down.Especially in heavy industries such as chemical industry, petroleum, metallurgy, water conservancy, and construction, DCY vertical axis hard tooth surface gear reducers are widely used.The maintenance of dcy vertical axis hard tooth surface gear reducer is very important. Improper maintenance will lead to equipment failure and damage, which will affect production efficiency and safety.During use, regular lubrication and maintenance are required, and the lubricating oil must be replaced in time to ensure the normal operation of the reducer.At the same time, the gears, bearings and other parts of the vertical axis gear reducer also need to be inspected regularly, and if problems are found, they can be repaired or replaced in time to avoid the expansion of the fault.In short, the dcy vertical axis hard tooth surface gear reducer, as a very excellent reducer model, has traditional Read More
  • dcy hard tooth surface reducer-vertical axis gear reducer

    2024-03-07

    The DCY hard tooth surface reducer is a type of hard tooth surface gear reducer. It is a transmission device in which the input shaft and the output shaft are arranged in a vertical direction. It is also called a vertical axis reducer.It is a commonly used mechanical transmission equipment and is widely used in various industrial fields, including machinery manufacturing, petroleum, chemical industry, metallurgy, water conservancy and other industries.The DCY hard tooth surface reducer has a compact structure, small size, light weight, high transmission efficiency, stable and reliable operation, and long service life. It is a very excellent reducer model.The characteristic of dcy vertical axis hard tooth surface gear reducer is that its gear adopts hard tooth surface. This very high hardness tooth surface can effectively reduce gear wear and improve the durability and service life of the gear.At the same time, the dcy vertical axis hard tooth surface gear reducer adopts a vertical installation method, which makes its installation more convenient and can be installed in a smaller space, thereby saving installation space and improving production efficiency.dcy vertical shaft hardened gear reducer Read More
  • Disassembly methods and steps of hard tooth surface reducer

    2024-03-06

    1. Remove the protective covers of each component of the hard-tooth surface reducer, remove the motor and brake lines, and mark the disassembly line for reference during future reassembly.2. Remove the high-speed coupling pin of the hard-tooth surface reducer, loosen the low-speed gear coupling, and move the two half couplings away from both sides.Before disassembling the high- and low-speed shaft couplings of the reducer, a flat shovel or template punch must be used to mark the relative bearings as a basis for reassembling the relative orientation of the couplings.3. Remove the motor anchor bolts and lift the motor.When the motor's anchors are removed, record the thickness and orientation of the original base gasket as a basis for alignment.Loosen the brake anchor bolts, remove the brake adjustment screw, bump the brake and remove the brake.4. Remove the check valve of the reducer and place it in the specified position to prevent collision.5. Make relative orientation marks on the upper and lower joint surfaces of the reducer, remove the fastening bolts on the joint surfaces of the upper and lower covers of the reducer, replace the damaged bolts, and remove the positioning pins.Check whether the bolts are damaged or Read More
  • Four steps to solve reducer oil leakage

    2024-03-06

    The invention of the reducer has made a huge contribution to people's industrial development, the advantages have become more and more obvious, and the functional effect is obvious to all.Although it is a reducer, it accelerates the development of this society, and the pace of development is getting faster and faster.But as its shortcomings are increasingly exposed, how can we solve the leakage problems left by these reducers?ANy good suggestions?The reducer manufacturer teaches you how to do it easily in four steps. No professional training or professional tools are required. It is easy to learn, has good results and is not expensive.1. Surface treatment: Extend the oil leakage area 1cm to both sides, use a polisher to make the original metal color, and clean it with alcohol or acetone.2. Mix the blending materials in proportion and stir evenly until there is no color difference.3. Apply the material first to fill the oil leakage area with the prepared metal repair material. After confirming that there is no leakage, cover it with rubber polymer repair and protection material.4. Curing 8 hours/24℃ (material Read More
  • Total 517 pages  Go to Page
  • Go

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK