Surface treatment technology of planetary gear reducer Selecting high-quality planetary gear reducer materials helps to improve its load-carrying capacity and service life.In view of the structural characteristics of the Xinghe reducer and the load characteristics of the gears, hard-toothed face gears should be widely used.There are many heat treatments available to obtain hardened gears.For example, surface quenching, overall quenching, carburizing quenching and nitriding should be selected according to the characteristics of the gear reducer.1. Surface hardening The common surface hardening methods are high-frequency quenching (for small gears) and flame quenching (for large gears).Works well when the case-hardened hardened layer includes the bottom of the dedendum.The hardness of the tooth surface can reach 45-55HRC.2. Nitriding and nitriding can ensure high hardness and wear resistance of gears with small deformation, and can not be well finished after heat treatment to improve bearing performance.3. Carburizing and quenching Carburizing and quenching gears have a large load-carrying capacity, but finishing (grinding) must be used Read More

If the hardness standard of the geared motor cannot meet the standard, long-term use, or use in an overload environment, will accelerate the wear of the hardened gear, which will affect the normal operation of the transmission. In order to better enable the normal operation of the equipment and prev Read More

If the hardness standard of the gear motor cannot meet the standard, long-term use or use in an overloaded environment will accelerate the wear of the hard gear, which will affect the normal operation of the transmission.In order to better enable the normal operation of the device and prev Read More

Cycloidal pinwheel reducers feature high-speed ratio and high-power single-stage transmission, which can reach a reduction ratio of 1:87, and the power is more than 90%. If multi-stage transmission is used, the reduction ratio is larger. Compact structure and small size. Due to the selection of the Read More

The cycloidal wheel beam reducer has a high-speed ratio and a high-power single-stage transmission, which can reach a reduction ratio of 1:87, and the power supply is greater than 90%.The reduction rate is even greater if multi-stage transfer is used.Compact structure and small size.due to the choice of Read More

Common faults of planetary reducerThe planetary cycloidal reducer is a reduction mechanism with advanced design and novel structure, applying the principle of planetary transmission, adopting the meshing of cycloidal pinwheels. This kind of reducer has replaced two-stage and three-stage ordinary cyl Read More