The hard tooth surface reducer is a relatively fine machine. The purpose of using it is to reduce the speed and increase the torque. It is suitable for the speed of the high-speed shaft not greater than 1500 rpm, the peripheral speed of the gear transmission is not greater than 20 m/s, and the working environment In an environment with a temperature of -40°C-45°C.The gears of the hard tooth surface deceleration equipment are made of high-strength low-carbon alloy steel through carburizing and quenching. The tooth surface has high hardness. The gears are all made of CNC grinding technology, with high precision, good touchability, high transmission efficiency, stable operation and low noise. ;Small size, light weight, long service life, high carrying capacity; easy to dismantle and install.Hard tooth surface reducer is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing and dyeing hard tooth surface reducer equipment, pharmaceuticals and other fields.A reducer is a power transmission mechanism that uses a gear speed converter to reduce the number of revolutions of the motor to the desired number of revolutions and obtain a larger torque.us Read More

For geared motor companies, it is very important to choose the right lubricant.So what is its specific usage?Let's take a look with the editor.First: Improper lubricants will prevent the geared motor from being fully lubricated and protected, which will not only affect the transmission accuracy, efficiency and working stability of the machine, but also cause wear, scratches, pitting, and heat generation on the gears. Phenomenon.At the same time, the metal grinding debris filled in the closed box will aggravate the wear, cause the geared motor to fail, and shorten the service life of the parts.There are two types of lubricants that meet the lubrication requirements of geared motors: lubricating oil and grease.Lubricants include base oils, additives and solid lubricants; grease components include base oils, additives, solid lubricants and thickeners.When selecting lubricant or grease, it must be determined according to the transmission structure design and working conditions of the geared motor.For example: gear geometry, material, peripheral/slip speed, Read More

After we have used the reducer for a period of time, we will find that its work efficiency has been reduced. The reason is that the equipment has produced a certain amount of dirt after a long time of use, not only on the appearance, but also on the internal parts. No exception, dirt is attached to Read More

After we use the reducer for a period of time, we will find that its working efficiency has been reduced.The reason is that, after prolonged use, the device degrades, not only in its appearance, but also in its internal components.Without exception, dirt is attached to Read More

Improve the vent cap and inspection hole cover: The internal pressure of the reducer is greater than the external atmospheric pressure is one of the main reasons for oil leakage. If you try to balance the pressure inside and outside the machine, oil leakage can be prevented. Although the reducer ha Read More

Improve the vent cover and inspection hole cover: The internal pressure of the reducer is greater than the external atmospheric pressure, which is one of the main reasons for oil leakage.If you try to balance the pressure inside and outside the machine, you can prevent oil leaks.Although the reducer ha Read More