In fact, the maintenance of the reducer is neglected by many users.If the reducer is not maintained for a long time, its life will be greatly reduced, and its performance will often be much worse than before.In order to make the reducer more durable, it is recommended that users perform regular maintenance Read More

1. When disassembling the protective covers of various parts, the disassembly lines of the motor and brake should be marked as a reference for reassembly.2. Remove the pin shaft of the high-speed shaft coupling of the cylindrical gear reducer, loosen the toothed coupling of the low-speed shaft, and move the two halves Read More

1. When disassembling the protective cover of each part, the disassembly line of motor and brake shall be marked as a reference for reassembly. 2. Remove the pin of the high-speed shaft coupling of the cylindrical gear reducer, unfasten the low-speed shaft tooth coupling, and move the two halves of Read More

Sometimes, the reducer can break the shaft.Why does the output shaft of the drive motor of the reducer break?In order to solve this problem, the cross-section of the output shaft of the drive motor unit of the reducer was checked.It can be said that the cross-section of the output shaft is Read More

Sometimes, the reducer may break its shaft. Why does the output shaft of the drive motor of the reducer break? In order to solve this problem, the cross section of the output shaft of the drive motor device of the reducer was checked. It can be said that the cross section of the output shaft is the Read More

The hard surface gear reducer is mainly a type of reducer manufactured according to the national standard, and it is mainly used for the transmission device with the output shaft arranged in the vertical direction.In industrial production, hard tooth surface reducers are mainly used in belt conveyors and speed changers Read More