Put the sleeve into the cycloidal needle hole accordingly, and turn it by hand to see if it can be turned.Check that the installation is correct.If it can rotate smoothly, you can install the basic parts to synthesize a complete cycloid reducer, haha!At this point, you can consider it complete Read More

Cycloidal pin gear reducer is a kind of transmission equipment usually used for low speed and high torque.The purpose of deceleration is to mesh with the electric motor, internal combustion engine or other high-speed power through the large gear on the input shaft of the cycloid reducer.There are many types of windmill reducers, which are divided into gear cycloid reducers and worm cycloid reducers according to the transmission mode. Read More

The working temperature of the lubricating oil in the cycloid reducer should generally not exceed 90 degrees Celsius.If the temperature is too high, the physical and chemical properties of the oil will change.For example, reducing the viscosity of an oil reduces the oil's load carrying capacity. Read More

The operating temperature of smooth oil in cycloidal pinwheel reducers should generally not exceed 90 degrees Celsius. If the temperature is too high, the physicochemical properties of the oil will change. For example, reducing the viscosity of the smooth oil reduces the load-bearing capacity of the Read More

The electric roller is a new type of driving device which put the motor and reducer together in the roller body. It is mainly used in fixed and mobile belt conveyor, instead of the traditional motor, reducer in the drive drum outside the separate drive device. Read More

The electric drum is a new type of driving device, which puts the motor and the reducer in the drum body.It is mainly used in fixed and mobile belt conveyors, instead of traditional motors, with an independent drive device outside the drive pulley of the reducer. Read More