Read More

Read More

Read More

There are many types of rolling bearings, and the following factors can be considered when selecting.How to choose the rolling bearing of ordinary lathe?①The magnitude, direction and nature of the load. Ball bearings are suitable for light loads, and roller bearings are suitable for heavy loads and Read More

There are many types of rolling bearings, and the following factors should be considered when selecting.How to choose the rolling bearing of ordinary lathe?① The magnitude, direction and nature of the load.Ball bearings are suitable for light loads, while roller bearings are suitable for heavy loads and Read More

The difference in structure is that the single support has three pin holes on the planet carrier, put three pins, and then fix the gears on the pins. One side of the gear is the planet carrier, and the other side is suspended, and a block is placed behind it. separate.The double-supported planet carrier is hollowed out by CNC, and then the pin holes are punched in the upper machining center. It must also be ensured that the pin holes on the upper and lower sides are completely concentric (otherwise the gears will not mesh with the gears), and then the gears are put in. Finally, it is fixed with pins, and both sides of the gear are supported by the planet carrier.The difference in force The single support structure is that the gears on the planet carrier are only stressed on one side, and the double support structure is that the gears on the planet carrier are stressed on both sides.3. The difference in performance The single-supported gear will be biased in the opposite direction of the output shaft transmission, and the friction coefficient between the planetary gear and the planetary ring gear will increase. As a result, the noise of the planetary reducer will increase, the efficiency will decrease, and the temperature will increase. If it rises, it will even lead to oil leakage.in addition Read More