What should I do if the DC resistance of the gear reducer motor fails? 2022-12-13
The main reason is that the welding quality is poor and the solder joints are open.In addition, the wire material and operation also have the following factors such as the standard of the electromagnetic wire, the winding fault, the winding connection, the rewinding coil technology, and the cracking of the wire.1. Standard aspects of gear motor electromagnetic wire 1. The thickness of the electromagnetic wire is uneven, one section is qualified, and a certain section is unqualified.2. The thickness of the electromagnetic wire is uneven, one section is qualified, and some section is unqualified.2. Faults in the geared motor winding 1. The winding of the geared motor (geared motor) has an inter-turn short circuit fault.2. There are two or more contacts between the winding and the casing, and a grounding fault occurs.Third, the connection of the winding 1. The connection of the winding components is not correct.2. The connecting wire, lead wire length or cross-sectional area of the geared motor do not meet the requirements.Check the connection rules of the winding components, correct the connection rules, and correct the wrong components.Check the connection line, the length and standard of the lead wire and the cross-sectional area, and correct it if it does not meet the requirements
Read More