WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / News

News Center

  • Comparison of helical planetary reducer and straight planetary reducer

    2023-06-23

    The helical planetary reducer can be regarded as a set of cylindrical gears with misaligned thin gears, so the contact points of each part are located at different parts of the tooth profile, thereby producing the effect of compensating the error of each thin gear.The elasticity of the teeth is very efficient, so a tooth with an error of less than 10 mm can average out, and under load, run as smoothly as a tooth with an error of 1 mm.Since at a given moment approximately half of the time (assuming a certain degree of overlap of 1.5) there will be two teeth, this has an added benefit in terms of strength.Therefore, the stress can be based on 1.5 times the tooth width instead of one tooth width.The main disadvantage of spur planetary gear units is that they generate vibration.Whether due to design, manufacturing, or deformation, some variation in the involute profile may occur simultaneously along the entire tooth flank.This will result in periodic one-shot firing of each tooth, which is usually quite intense.The resulting vibrations cause large loads on the gears and noise Read More
  • What are the requirements for the planetary reducer to leave the factory?

    2023-06-23

    Technical requirements for factory inspection of planetary reducer: 1. The outer surface of the reducer should be flat and smooth, and the fasteners must not be loose.2. The reducer is sealed, and the joints must not leak oil.3. When turning the input shaft of the reducer by hand, it must be relaxed and stable without jamming.4. The axial working clearance should meet the regulations.Test method of planetary reducer: 1. After the reducer has passed the test, a load test should be carried out.2. At the rated speed, the reducer is loaded step by step according to 25%, 50%, 75%, 100%, 110%, and 125% of its rated torque.3. For reducers that operate in both directions or do not specify the direction of rotation, positive and negative tests should be carried out respectively.4. In the thermal power load test, the temperature of the reducer oil pool is stable for two hours.Its temperature should meet the requirements, each seal, joint, Read More
  • Planetary reducer production process

    2023-06-16

    Planetary reducer is a kind of reduction device widely used in modern industry. It has the advantages of compact structure, light weight, strong bearing capacity, long life and high transmission efficiency. It is an important part of the mechanical transmission field.The production of planetary reducer needs to go through strict control of multiple links to ensure the safety and stability of the product.First of all, the planetary reducer needs to be produced with high-precision machine tools and transmission supporting equipment, and the understanding and control of material characteristics should be strengthened during the production process to ensure the stability of the product's structural bearing capacity and performance indicators.Since the transmission components of the planetary reducer are quite complex, its processing and assembly technology also needs to have high standards and precision.Secondly, the production of planetary reducer needs to establish a perfect quality control system to ensure the stability and safety of product quality.Through the establishment of a complete production process, the use of modern testing equipment and means, the testing and verification of products, and the establishment of good communication and coordination with customers Read More
  • Features of planetary gear reducer

    2023-06-16

    Planetary gear reducer is a common mechanical transmission device, which has the advantages of compactness, high efficiency and stable transmission, and is widely used in industry, medicine and other fields.The planetary gear reducer is composed of internal gears, external gears, planetary gears and reduction boxes.The important feature of the planetary gear reducer is that the planetary gears are concentric with the rotating main shaft, and they are connected by the planetary carrier.Through the reducer, the rotation speed can be reduced from the high-speed device to the set speed of the reducer to achieve the corresponding torque change.Planetary gear reducers can achieve different speed and torque changes through different transmission ratios and different layouts.In addition, the planetary gear reducer has higher efficiency and lower noise during transmission.Planetary gear reducers have high precision and stability, and they can adjust the layout to suit different transmission tasks and torque outputs, and can also be used in combination with various types of electric motors to become a more powerful power device.Planetary gear Read More
  • The characteristics of the reducer used in manufacturing machinery

    2023-06-16

    The reducer is a rotating mechanical transmission device, which is widely used in various industrial equipment and mechanical equipment.It reduces the speed of the driving device and increases the torque, so that the output speed decreases and the output torque increases, so as to achieve the effect of decelerating the mechanical transmission and increasing the torque.The reducer for manufacturing machinery is an indispensable mechanical transmission device in the field of industrial manufacturing.The reducer used in manufacturing machinery has the following characteristics: 1. Strong bearing capacity: the reducer used in manufacturing machinery can carry huge torque and heavy load, and is suitable for the transmission needs of various large-scale mechanical equipment.2. Stable speed: The reducer can convert the energy of high-speed rotation into low-speed and high-torque energy output, making the equipment run stably.3. Energy-saving and power-saving: By adopting manufacturing technology and Noritz gears, bearings and other spare parts, the efficiency of the reducer is improved, and better energy-saving effects can be achieved.4. Long life: the reducer adopts high Read More
  • Basic requirements for gear reducer safety factor

    2023-06-09

    One of the basic requirements for the safety factor of a gear reducer is to make the gears have sufficient load-bearing capacity.Recently, although there are recognized (standard) calculation methods for the load-carrying capacity of the tooth surface, tooth root and gluing, there are many factors (commonly used coefficients or parameters) that affect the load-carrying capacity of gears, and some influencing factors are contradictory and mutually inconsistent. Therefore, for a general engineer who is initially involved in gear design, it may be difficult to complete the gear transmission design satisfactorily.newgear clearly pointed out in IS06336: 1996 the calculation method of the bearing capacity of involute cylindrical spur gears and helical gears: ISO6336 is not used to guarantee the performance of the installed gear device, nor can it be used by general engineers. provided by experienced gear designers.These designers can reasonably choose the values ​​of the coefficients in the formula based on similar design experience, and have a clear understanding of Read More
  • Total 517 pages  Go to Page
  • Go

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK