What are the factors of gear pitting and shedding of reducer?Answer: A material, hardness, defect.The gear material does not meet the requirements; the primary factor affecting the contact fatigue strength of the gear is the low hardness after heat treatment, which cannot guarantee the proper Read More

1 Equipment and adjustment In order to ensure the accuracy of the reducer (reduced motor) equipment, it is not necessary to start the equipment and not damage the sealant.You can open the oil inspection cover or use kerosene (diesel) to clean the anti-rust grease on the gear surface.b. Read More

The reducer is connected in series with shaft a.It is because the input shaft loses its axial coupling due to broken teeth, resulting in shaft strings.b.The driven gear on the base shaft is not securely fastened to the shaft.In actual transmission, it is generally due to the interference between the driven gear and the base shaft Read More

When hobbing with a rack-type pillar, when the reference line of the rack cutter is tangent to the pitch circle of the rack, the cut gear is a standard gear; when the reference line of the rack cutter is not in line with the pitch circle of the wheel blank When cutting, the cut out gear is modified Read More

The reducer is a power transmission mechanism.The governor of the gear is used to reduce the number of revolutions of the electric motor (electric motor) (gear motor) to the required number of revolutions and obtain a larger torque organization.In organizations currently used to transmit electricity and mobility Read More

Gear reducer types by relative motion: plane gear reducer (axis parallel); space gear reducer (axes not parallel).According to the tooth profile curve: involute gear; cycloid gear; circular arc gear; parabolic gear can be divided into high speed and medium speed according to the speed Read More