WGT-MC3PVSF03FFB-1/25-NA60-23+YBBP200L-4B5-30KW4P+B5+EXP-A;sf 2.46
wgt.net.cn@gmail.com
wire transfer
Wooden box
Shanghai/Ningbo
WGT
China
| SKU: | |
|---|---|
| Availability: | |
| Quantity: | |
The WGT-MC3P explosion-proof stirring reducer is a complete drive package engineered for agitator and mixer duty in hazardous chemical environments. Each unit pairs a case-hardened industrial gearbox with an Ex d IIB T4 Gb explosion-proof motor, delivering reliable mixing power for flammable and explosive process media. WGT Gearbox manufactures the full series — including bare explosion-proof gearboxes and motor-gearbox combinations such as WGT-MC3PVSF0 and WGT-MC3PVSF07FFB — with matching flameproof motors from 0.55 kW up to 200 kW.
| Item | Typical Range | Notes |
|---|---|---|
| Motor power | 0.55 – 200 kW | YBBP series Ex d IIB T4 Gb flameproof motors, e.g. YBBP-355M2-10 (132 kW, 600 r/min) |
| Output speed | 10 – 300 r/min | Matched to impeller type: axial-flow, turbine, anchor, helical ribbon |
| Gear ratio | i = 5 – 87 (multi-stage available) | Case-hardened, ground gearing for long service life |
| Output torque | up to 30,000 N·m | Verified against agitator shaft load and start-up torque |
| Mounting | Vertical flange, reaction-arm support | With or without mixing shaft, mechanical seal interface |
| Explosion-proof class | Ex d IIB T4 Gb | For Zone 1 / Zone 2 hazardous areas; IIC on request |
Table shows typical series ranges. Every application is sized individually — use the WGT online selection system for exact model, ratio and thermal verification.
Chemical reactors (5–50 m³): solvent-based polymerisation and mixing where Ex d IIB T4 Gb certification is mandatory; the gear unit keeps impeller speed constant under viscous load swings.
Pharmaceutical & fine chemical plants: API and intermediate stirring with strict start-stop cycles; hard-tooth-surface gearing maintains alignment and low noise after thousands of duty cycles.
Coatings, resins & adhesives: high-viscosity anchor or helical-ribbon impellers demanding high output torque at low r/min — a classic duty for this explosion-proof stirring reducer family.
Wastewater & flammable solvent recovery: dosing and blending in classified areas where non-sparking, flameproof equipment is required by safety code.
A coatings manufacturer needs to agitate a 15 m³ solvent-based reactor at 75 r/min. The process requires about 22 kW shaft power with a service factor of 1.5 for viscous start-ups. The sizing chain works like this: a 30 kW, 1,470 r/min flameproof motor (YBBP-200L-4) feeds a multi-stage industrial gearbox with ratio i ≈ 19.6, delivering 75 r/min at the impeller with torque margin for start-up. Output bearing and overhung load are checked against the agitator shaft, and the thermal rating is verified for continuous duty. The final proposal in this class was a WGT-MC3PVSF07FFB motor-gearbox set with Ex d IIB T4 Gb certification.
Your duty point will differ — viscosity, solids content, impeller type and start frequency all shift the optimum ratio and frame size. That is exactly what the configurator below is for.
Open the WGT Motor & Gearbox Online Selection System, enter your power, input speed and required output torque or ratio, and the system returns matching models with technical data in seconds — no waiting for a quotation reply.
Need a cross-reference against SEW, NORD or another imported unit? Send us the nameplate photo or type designation and our engineers will reply with a drop-in equivalent, price and lead time within 24 hours. Custom voltages, IIC class and marine-duty options are available on request.
It is recommended that you use the motor reducer 3DSelection system to work efficiently. Click on the picture and link to have it. There is a Chinese-English version toggle.
https://weigao.comp.yunqi3d.com/#/selection/params
It is more convenient for WeChat users to use mini programs
There is a Chinese and English version toggle
