Article List
- Oil hole and installation method of gear reducerOne of the reasons for purchasing the oil leaker of the gear reducer is to choose the wrong choice, resulting in a conflict between the installation method and the position of the oil hole, resulting in oil leakage from the oil hole.Proper mounting method should be provided during model SEL
- How to lubricate the gear reducer?How to lubricate the gear reducer.The lubrication of the reducer is also a very important link to maintain the reducer.Open and semi-open reducer drives or low-speed closed gear drives are usually lubricated periodically by people, and the lubricant used is lubricating oil o
- How to lubricate the gear reducer?How to lubricate the gear reducer. The lubrication of the reducer is also a very important link for the maintenance of the reducer. Open and semi open gear reducer drives, or closed gear drives with low speed, are usually lubricated periodically by people, and the lubricant used is lubricating oil o
- How to understand the structural characteristics of the slope reducer?How to understand the structural characteristics of the bevel gear reducer.q: What are the structural characteristics of the bevel gear reducer?Answer: Shanghai Jiacai reducer will answer you: the transmission ratio of the bevel gear reducer is fixed, but in engineering practice, some jobs are often machine
- How to understand the structural characteristics of bevel gear reducer?How to understand the structural characteristics of bevel gear reducer.Q: what are the structural characteristics of bevel gear reducer?Answer: Shanghai Jiamai reducer will answer for you:The transmission ratio of bevel gear reducer is fixed, but in engineering practice, some working machines often
- How to effectively inspect and maintain the reducer?How to effectively inspect and maintain the reducer.Different lubricants must not be mixed with each other.The positions of the oil level plug, oil drain plug and breather are determined by the installation position.Their relative location can be determined by referring to the installation PO
- How to effectively inspect and maintain the reducer?How to effectively inspect and maintain the reducer. Different lubricating oils shall not be mixed with each other. The positions of oil level plug, oil drain plug and breather are determined by the installation position. Their relevant positions can be determined by referring to the installation po
- How to prevent the reducer from rustingThe controller pin reducer is a new type of transmission device, which is applicable to the principle of planetary transmission and adopts maintenance pin tooth meshing.All transmissions of the cycloid speed reducer can be divided into three parts: input part, reduction part and output part.The reducer is an ind
- How to prevent rust of reducerCycloid pin gear reducer is a novel transmission device which applies the principle of planetary transmission and adopts cycloid pin tooth meshing. All transmission devices of cycloidal pinwheel reducer can be divided into three parts: input part, deceleration part and output part. Reducer is an ind
- Problems needing attention when using cycloid reducerIn addition to paying attention to the problems of the product itself, it is also necessary to understand the matters needing attention when using the cycloid reducer, so as to avoid failures caused by improper operation during use.To replace lubricating oil, the user should