How to effectively inspect and maintain the reducer?

How to effectively inspect and maintain the reducer.Different lubricants must not be mixed with each other.The positions of the oil level plug, oil drain plug and breather are determined by the installation position.Their relative positions can be determined by referring to the installation position diagram of the reducer.The following describes Shanghai Jinchuan reducer mainly through oil replacement, oil level inspection, oil level plug for reducer, voltage inspection, etc.
1. Oil level plug for reducer
Check whether the oil level is qualified; install the oil level plug.
2. Oil replacement
After cooling, the viscosity of the oil increases, making it difficult to drain the oil.The reducer should change the oil at the working temperature.Cut off the power to prevent electric shock!Wait until the reducer cools down and there is no risk of burning!
3. Precautions
Inject new oil of the same brand; the amount of oil should be consistent with the installation position; check the oil level of the oil level plug; tighten the oil level plug and breathe; the reducer is kept warm during the oil change; drain the oil under the drain plug; open the oil level plug, Breather and drain plug; drain all oil; install oil drain plug.
4. Oil level check
Cut off the power to prevent electric shock!Wait for the reducer to cool down; take out the oil level plug and check whether the oil is full; install the oil level plug.
5. Water inspection
Cut off the power to prevent electric shock!Wait for the reducer to cool; open the drain plug and take an oil sample; check the viscosity index of the oil; if the oil is obviously cloudy, it is recommended to replace it as soon as possible.