WeiGao Transmission
Email: sales@wgt.net.cn
Language
通栏图2
tonglantu.jpg
Home / Products / Coupling / GR and HR precision universal joints

Product Search

Products Category

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

GR and HR precision universal joints

SKU:
Availability:
Quantity:

The GR and HR precision universal joint is WGT Weigao Transmission's single-joint, quick-release precision universal joint for small and medium shafts. It transmits torque across an angular misalignment while allowing the driven unit to be uncoupled in minutes instead of hours. Mechanically it is one compact fork-and-socket assembly: a machined cross-pin and bearing yoke at one end, a socket with an integral quick-locking sleeve at the other. Two configurations share the same dimensional family – GR is the plain version, HR the needle-bearing version, published by WGT with a maximum speed of 4000 r/min. This quick-lock construction separates the series from the bolted flange couplings used in heavy drive lines, and it is why the family keeps surfacing in universal joint selection work for test rigs, textile machines, printing equipment, packaging lines and small gear reducer selection projects where the driven machine must be changed or serviced quickly.

The defining geometric difference against the large cross-shaft series is the working angle. A GR/HR is a single-joint coupling: one pin crossing one bearing, with a maximum rotation angle of 30 degrees per joint. That makes it compact, sensitive and precise, but driven-shaft speed also rises with misalignment, so the joint must never be run at its angle limit in a high-speed application. Ten sizes are offered, from 8 mm to 30 mm bore, and every size can be ordered with a round bore, a key-groove bore or a hexagon bore – which is what lets it engage driven spindles, stepped shafts and hex tooling that never get keyed.

Typical Specifications of the GR and HR Precision Universal Joint

Size (GR) Size (HR) Bore d1.d2 [H7] (mm) Body Ø D (mm) Overall length L2 (mm) Half length L1 (mm) Socket depth C (mm) Lock sleeve Y (mm)
01GR – 8 16 38 18 10 4
1GR 1HR 10 20 42 21 12 4
02GR 02HR 12 23 52 26 15 7.5
03GR 03HR 14 25 59 29.5 17 8.5
04GR 04HR 16 32 86 43 24 14.0
05GR 05HR 18 36 96 48 28 19.0
06GR 06HR 20 42 108 54 31 19.0
07GR 07HR 22 45 120 60 34 20.5
08GR 08HR 25 50 132 66 38 20.5
09GR 09HR 30 58 166 83 49 25.0

Catalogued dimensional figures. Overall length L2 equals twice the half length L1 on every size, and the frame in each row is the frame carrying that bore. Confirm the final bore and shaft-end geometry against the actual working conditions before releasing an order.

Bore Options and Cross-Pin Data

Size (GR / HR) Cross-pin Ø e (mm) Key width a [JS9] (mm) B-type bore Ø b (mm) Hexagon SW [H8] (mm)
01GR 4 3 9.4 8
1GR / 1HR 4 4 11.4 10
02GR / 02HR 4.8 4 13.8 12
03GR / 03HR 5.5 5 16.3 14
04GR / 04HR 6.35 5 17.3 16
05GR / 05HR 8.0 6 19.8 18
06GR / 06HR 8.0 6 22.3 20
07GR / 07HR 10.0 6 24.8 22
08GR / 08HR 10.0 8 28.3 25
09GR / 09HR 10.0 8 33.3 30

Key widths follow the DIN 6885/1 (JS9) parallel-key series, dimensionally equivalent to the GB/T 1095 keyway series. The B-type column gives the bore diameter when the key-groove bore is fitted; SW gives the hexagon across-flats for the D-type bore.

Operating Limits and Bore Forms

Item Value Notes
Joint type Single joint, quick-locking Released for quick changeover without removing the driven machine
Maximum rotation angle 30° per joint A double-joint arrangement is needed if more angular compensation is required
Maximum speed, HR type 4000 r/min HR is the needle-bearing version; GR is offered without that speed rating
Bore tolerance H7 finished bore d1 at the yoke end, d2 at the socket end
Quick-lock bore options Keyway to DIN 6885/1-JS9, or hexagon hole Available on H7 tolerance finished bores only
Bore form codes A / B / C / D A round bore with retaining groove, B key-groove bore, C square bore, D hexagon bore
Ordering code 03 GR | A(B,C,D) | 14 | A(B,C,D) | 14 Size and type, left bore form, left bore diameter, right bore form, right bore diameter

Because the coupling is dimension-driven, the frame is fixed by the bore diameter. Confirm that the rated torque of the selected frame covers your working torque, and that the running speed sits inside the speed limit of the chosen version.

Where This Precision Universal Joint Is Used

  • Packaging machinery: carton erectors, film wrappers and rotary indexing tables where the driven station is repositioned or swapped on the line.

  • Textile equipment: yarn tension rollers, creels and take-up units running at constant speed through a small misalignment between drive pulley and spindle.

  • Printing and converting machines: unwind and rewind shafts, guillotine and folding drives that absorb frame movement along a long machine bed.

  • Test rigs and dynamometer benches: shaft alignment on a single-joint test frame, where the quick release changes a sensor or specimen holder without dismantling the rig.

  • Motion simulation and robotics: servo-driven actuators and motion platforms needing a compact, low-inertia joint with a defined angular envelope.

  • Small drives and laboratory equipment: dispensers, mixers, centrifuge drives and winding units where the hexagon or key-groove bore engages a plain spindle directly.

  • Medical, clean-room and service equipment: compact drive links where a quick-release joint supports fast tool or cartridge changes.

Selection Example: 5.5 kW Packaging Drive with 12° Misalignment

A packaging line drives a rotary indexing table from a 5.5 kW, 1450 r/min motor through a single-joint precision universal joint, with a 12° angle between the motor and table shafts and a 16 mm shaft on both sides.

Step 1 – torque. The torque the joint must carry comes from the shaft power: T = 9550 × P / n = 9550 × 5.5 / 1450 = 36.2 N·m. This is the working torque; a duty factor for start-up and impact loading is applied on top before comparing against the frame rating.

Step 2 – frame from the bore. A 16 mm shaft selects the 04 size: 04GR or 04HR, with a 16 mm H7 bore, 32 mm body diameter, 86 mm overall length and 43 mm half length. The key width for a 16 mm shaft is 5 mm (JS9) and the B-type key-groove bore measures 17.3 mm; on a hex-driven spindle the hexagon across-flats is 16 mm (H8).

Step 3 – angle check. The 12° misalignment sits inside the 30° maximum rotation angle per joint, with clear margin. This is the critical check for any single-joint arrangement, because driven-shaft speed increases with the angle.

Step 4 – speed check. The joint runs at 1450 r/min. The HR needle-bearing version is published to 4000 r/min, so 04HR is the safe choice; the GR version carries no needle-bearing speed rating and suits only running speeds compatible with the plain-bearing arrangement.

Step 5 – order code. With key-groove bores at both ends the order line reads 04 GR | B | 16 | B | 16. The value of the quick-lock joint shows here: the driven table is uncoupled and swapped without loosening flange bolts.

Your duty point will differ – power, bore, angle, speed and the driven machine all shift the optimum frame. That is what the selection system below is for.

Get the Exact Model Online — Free Selection System

Open the WGT Motor & Gearbox Online Selection System, enter your power, input speed, bore and the angle to accommodate, and the system returns the matching GR/HR frame with its technical data in seconds – no waiting for a quotation reply. For universal coupling sizing that has to sit between a gear reducer and the machine, send us the reducer output speed and shaft diameter and our engineers will return the complete drive train proposal, including universal joint maintenance and inspection intervals for the selected frame.

Previous: 
Next: 

WeiGao Transmission

Weigao Gear Reducer is an alliance group company that integrates research and development, production, sales, and service

+86 400 801 9158

Email: sales@wgt.net.cn;wgt.net.cn@gmail.com
Tel:+86571 85023000

WEIGAO REDUCER

FEEDBACK