What should be paid attention to when using 12V micro DC geared motor?

Publish Time: 2019-10-03     Origin: Site

The 12V miniature DC geared motor is one of the commonly used low-power reducers, and it usually adopts a customized power mode.The 12V miniature DC gear motor has the characteristics of low noise, long service life, small size, large torque, low energy consumption, high transmission precision, and customizable power.It has a wide range of applications.So what are the precautions for using a 12V micro DC geared motor?

Precautions for using 12V micro DC geared motor:

1. The 12 V miniature DC geared motor should not be stored or operated in a high temperature or humid environment, nor should it be placed in a corrosive gas.

2. Before use, please make sure the motor voltage is correct and the power supply current is sufficient.

3. When assembling rotating parts such as gears and pulleys on the motor shaft, do not move abnormally when pressing.

4. When installing the motor, please pay attention to whether the screw is too long to prevent the screw from touching the parts inside the motor.

5, 12v miniature DC geared motor cannot be overloaded.There are two reasons for overloading.Torque and axial force, the load torque cannot exceed the rated torque of the motor, axial force


FEEDBACK

How to detect early fracture of ZLYJ173 reducer gear

How to judge the degree of breakage of ZLYJ series reducer gears by listening to the sound

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer