What are the common causes of failure of NGW102-6 planetary reducer bearing components?
Publish Time: 2026-10-27 Origin: Site
1. Lubrication failure
Insufficient lubricating oil/grease, oil aging, grease carbonization, improper viscosity or grade Selection will cause the oil film to become thinner or even ruptured, resulting in increased bearing temperature, raceway scratches, pitting, peeling, and in severe cases, jamming.
2. Overload and impact load
The actual load exceeds the rated load capacity of the bearing, or frequent starts and stops, forward and reverse rotation, gear meshing impact, and poor load sharing will cause high contact stress on the planetary bearing, resulting in local spalling, plastic deformation, and early fatigue.
3. Improper installation and assembly
Coaxiality deviation, insufficient accuracy of the bearing seat hole, too tight or too loose fit, improper adjustment of preload/clearance, and violent installation will cause the bearing to bear additional stress, resulting in raceway indentation, circling, and abnormal temperature rise.
4. Seal failure and contaminant intrusion
Aging of the sealing ring, lip wear, assembly damage or untimely maintenance can easily cause dust, moisture and metal shavings to enter the bearing cavity, causing three-body wear, corrosion and lubricating film damage.
5. Bearing fatigue
Under the action of long-term alternating stress, the rolling elements and raceways will suffer from pitting corrosion, pitting, and fish-scale peeling. Planetary bearings have compact space and high rotational speed. If cooling and lubrication are insufficient, the fatigue process will be significantly accelerated.
6. Material and manufacturing defects
The bearing ring material contains inclusions, segregation, insufficient hardness, or the machining dimensions of the bearing seat hole are out of tolerance, which may become the source of early failure.
7. Bearing chamber/bearing position wear
Long-term heavy load, improper fit tolerance or poor lubrication may cause the outer ring or inner ring of the bearing to rotate relative to each other, causing outer and inner rings to run away, further causing temperature rise, vibration and dimensional instability.
8. Electrical corrosion damage
If the reducer is matched with a variable frequency motor, the shaft current may break down the oil film and form regular pits or groove-like electrical corrosion marks on the raceway.
During on-site inspection, you can first check the lubrication status, then check the vibration, temperature rise and noise. After disassembly and inspection, focus on observing peeling, indentation, running circles, electrical corrosion and seal status, and combine the installation records and load conditions to determine the main cause.