RV worm gear reducer operating conditions and precautions

Publish Time: 2022-12-13     Origin: Site

RV worm gear reducer operating conditions


1. The transmission is stable, the vibration, impact and noise are small, the reduction ratio is large, the versatility is wide, and it can be used with various mechanical equipment.

2. A large transmission ratio can be obtained with a single-stage transmission, and the structure is compact. Most types of reducers have better self-locking properties, and the braking equipment can be saved for mechanical equipment that requires braking.
3. The meshing friction loss between the worm screw teeth and the worm gear tooth surface is relatively large, so the transmission power is lower than that of the gear, and it is easy to generate heat and high temperature.
4. Higher requirements for lubrication and cooling.
5. Good compatibility, worm gears and worms are manufactured according to national standards, and standard parts are used for bearings and oil seals.
6. There are basic types of cabinets (the cabinet is of vertical or horizontal structure with a foot plate) and all-round type (the box is a cuboid with fixed screw holes on multiple sides, without a foot plate or an additional bottom. foot plate and other structural types)

7. There are two types of input shaft connection: basic type (single input shaft and double input shaft), and motor flange.
8. The azimuth direction of the output and input shafts has the input shaft down and up; the output shaft up and down; the input shaft up and down.
9. Two or three reducers can be used to form a multi-stage reducer to obtain a large transmission ratio.


Precautions for RV worm gear reducer


1. The worm speed of the RV worm gear reducer cannot exceed 1500r/min.
2. The operating environment temperature is -40°C-+40°C. When the operating environment temperature is lower than 0°C, the lubricating oil must be heated to above 0°C before starting. When the operating environment temperature is higher than 40°C, it must be cooled measure.
3. The shaft of the worm gear reducer can roll forward and reverse.

FEEDBACK

Gearbox Thermal Power Rating: Why a Mechanically Strong Unit Still Overheats

The whole process of reducer bearing replacement: pre-disassembly determination, clearance retest and hot assembly specifications - Hangzhou Weigao Transmission

Gearbox Aftermarket 2027: Spare Parts, Castings and Gearbox Price Trends

Gear reduction motor brake Selection and adjustment: braking torque, air gap and frequency conversion cooperation - Hangzhou Weigao Transmission

Conveyor Gear Motor Start-Up Torque: Breakaway Load and Soft Start Options