Detailed introduction of F series parallel shaft helical gear reducer

The four series of reducers occupy a considerable share in modern industrial reducers. The four series of reducers adopt serialization and modular design ideas, have a wide range of adaptability, and have a lot of motor combinations and installation positions. And the structural form, the transmission ratio is finely graded to meet different operating conditions and realize mechatronics. Next, I will introduce the F series reducer in the four series in detail.

1. F series reducers are manufactured in accordance with international technical requirements and have high technological content.
2. Space-saving, reliable and durable, with high overload capacity, the power can reach more than 90KW.
3. F series parallel shaft helical gear reducer has low energy consumption, superior performance, and the efficiency is as high as 95%.
4. The parallel shaft helical gear reducer has low vibration, low noise and high energy saving. It adopts high-quality section steel material, rigid cast iron box body, and the gear surface is subjected to high-frequency heat treatment.
5. After precision machining, the parallelism of the shaft and the accuracy of positioning are ensured. All these constitute the reducer of the gear transmission assembly and are equipped with various motors, forming a mechatronic integration, which fully guarantees the quality characteristics of the reducer motor product.

Features:

1. Parallel output, compact structure, large transmission torque, stable operation, low noise and long life.
2. Installation method: base installation, hollow shaft installation, flange installation, torque arm installation, small flange installation.
3. The rotation direction of the input and output of the second stage of the basic type is the same, and the rotation direction of the third stage is opposite; please consult for F/R combination.
4. Output mode: hollow shaft output or solid shaft output.
5. Average efficiency: 96% for the second stage, 94% for the third stage, and 85% for the combination of F series/R series.

Technical Parameters:

Speed ​​ratio range: basic type 3.81～281.71, F/R combined type can reach 31434
Torque range: 200～18000 Nm
Power range: 0.18～200kW

structure type:

F-shaft extension, foot installation FF-shaft extension, flange installation
S-indicates shaft input FA-shaft-mounted connection
FAF-shaft mounted, flange mounted