Bevel gearbox and hard-tooth surface bevel gear reducer are the characteristics and differences of two commonly used reducers.

Gear reducers are an indispensable part of modern industry, among which bevel gearboxes and hard-tooth surface bevel gear reducers are two commonly used reducers.This article will introduce the characteristics and differences of these two reducers, as well as their applications and methods in industry.

1. Bevel gearbox

The bevel gearbox is a common reducer that consists of a pair of bevel gears. The output speed and torque are changed by changing the helix angle and number of teeth of the two bevel gears.Bevel gearbox has the following characteristics:

1. Large transmission ratio range: The transmission ratio of the bevel gearbox can be adjusted within a wide range to meet the needs of different loads and speeds.

2. Strong load-bearing capacity: The bevel gear of the bevel gearbox has a large contact area and high load-bearing capacity, and can withstand large loads and impacts.

3. High transmission efficiency: The transmission efficiency of the bevel gearbox is high, which can reach more than 90%.

4. Long service life: The bevel gear material and heat treatment process requirements of the bevel gearbox are relatively high, which can ensure a long service life.

2. Hard tooth surface bevel gear reducer

The hardened bevel gear reducer is a new type of reducer that adopts the design of hardened bevel gears and hypoid gears, which has higher transmission accuracy, lower noise and higher transmission efficiency.Hardened bevel gear reducer has the following characteristics:

1. High transmission accuracy: The transmission accuracy of the hard-toothed bevel gear reducer can reach within level 1, which can ensure high-precision transmission requirements.

2. Low noise: Due to the hypoid gear design, the hard tooth surface bevel gear reducer has low noise and can meet the low noise requirements.

3. High transmission efficiency: The transmission efficiency of the hard-toothed bevel gear reducer can reach more than 90%, which can ensure high-efficiency transmission requirements.

4. Long service life: The hard tooth surface material and heat treatment process of the hard tooth surface bevel gear reducer have high requirements, which can ensure a long service life.

3. The difference between bevel gearbox and hard tooth surface bevel gear reducer

Bevel gearboxes and hard-tooth surface bevel gear reducers differ in the following aspects:

1. Different transmission methods: the bevel gearbox uses bevel gear transmission, while the hard-tooth surface bevel gear reducer uses hypoid gear transmission.

2. Different transmission accuracy: The transmission accuracy of hard-tooth surface bevel gear reducer is higher than that of bevel gearbox.

3. Noise is different: The noise of the hard-toothed bevel gear reducer is lower than that of the bevel gearbox.

4. Different service life: Due to higher requirements on materials and heat treatment processes, the service life of hardened bevel gear reducers is longer than that of bevel gearboxes.

4. Application areas and Selection methods

Bevel gearboxes and hardened bevel gear reducers are widely used in various industrial fields, such as steel, mining, lifting, petroleum, chemical industry, etc.When Selection, you need to select the appropriate model based on actual needs, including transmission ratio, load, speed and other factors.At the same time, factors such as usage environment and maintenance also need to be considered.

In summary, bevel gearboxes and hardened bevel gear reducers are commonly used types of reducers in industry.Understand their characteristics, differences, and application areas