Article List
- Stages and applications of cylindrical gear reducersCylindrical reducers can be divided into single-stage, two-stage, three-stage and multi-stage reducers according to the number of reduction gears; according to the mutual configuration of axes in space, it can be divided into vertical and horizontal reducers; according to the characteristics
- What kind of occasions need to be equipped with servo planetary reducer?1. Load and precision: This is necessary when the load must be moved and precise positioning is required. Generally, such automation equipment as aviation, satellite, medical treatment, military science and technology, wafer equipment, robot and so on. Their common feature is that the torque require
- What occasions need to be equipped with a servo planetary reducer?1. Load and precision: This is necessary when a load has to be moved and precise positioning is required.Generally speaking, such automated equipment is aviation, satellite, medical, military science and technology, wafer equipment, robotics, etc.Their common feature is the torque requirement
- Difference between hard tooth surface reducer and soft tooth surface reducerIn the process of gear transmission design, especially closed transmission, if the hardness of the gear is not fully considered in the design, it will have a great impact on the performance of the transmission system. Such as common gear failure: tooth surface pitting, tooth root fatigue fracture, e
- The difference between hard tooth surface reducer and soft tooth surface reducerIn the process of gear transmission design, especially closed transmission, if the hardness of the gear is not fully considered in the design, it will have a great impact on the performance of the transmission system.Such as common gear failure: tooth surface depression, tooth root fatigue fracture, e
- Application range of hard gear reducer1. The speed of the high-speed shaft should not be greater than 1500 rpm; 2.The peripheral speed of gear transmission should not be greater than 20m/s; 3.The working environment temperature is -40°C - 45°C.If it is below 0°C, it will preheat above 0°C before starting
- Application scope of hardened gear reducer1. The speed of high-speed shaft shall not be greater than 1500 rpm;2. The circumferential speed of gear transmission shall not be greater than 20m / S;3. The working ambient temperature is - 40 ℃ - 45 ℃. If it is lower than 0 ℃, the lubricating oil shall be preheated to above 0 ℃ before startup.Har
- Characteristics of rotary reducerhollowed areas The rotary table of the hollow rotary platform is a hollow structure, and the servo motor is connected on the side to facilitate the installation of gas pipe and wire in the smelting tool.High repeat positioning accuracyThe hollow rotating platform adopts the single-stage helical gear
- Features of rotary reducersThe rotary table of the hollow rotary platform in the hollow area is a hollow structure, and the servo motor is connected to the side to facilitate the installation of gas pipes and lines in the smelting tool.Repeat positioning accuracy Hollow rotary platform adopts single-stage helical gear
- Characteristics of hardened cylindrical gear reducer1) High bearing capacity. The gear is carburized, Quenched and ground, and the bearing capacity is greatly improved compared with the gear reducer with soft tooth surface and medium hard tooth surface of hardened and tempered hobbing.2) Small size and light weight. Compared with the reducer with sof