Worm gear reducer knowledge

Publish Time: 2021-10-12     Origin: 威高传动

The worm gear reducer is a power transmission mechanism that uses a gear speed converter to reduce the number of revolutions of the motor to the required number of revolutions and obtain a larger torque.In mechanisms for transmitting power and motion, reducers are widely used.

The basic structure of the worm gear reducer is mainly composed of transmission parts, worm gears, shafts, bearings, boxes and accessories.It can be divided into three basic structural parts: box body, worm gear, bearing and shaft combination.The case is the basis of all accessories in the worm gear reducer.It is an important accessory to support and fix the shafting parts, ensure the correct relative position of the transmission parts, and support the load acting on the reducer.The worm gear is mainly used to transmit motion and power between two interlaced shafts, and the bearings and shafts are mainly used to transmit power, operation and improve efficiency.

Some accessories of the worm gear reducer are described as follows:

Oil cap/breather, mainly used for exhaust in case of worm gear reducer;

The end caps are divided into large end caps and small end caps.The end cover is used to fix the axial position of the shafting components and bear the axial load.Both ends of the bearing seat hole are closed with bearing caps;

Oil seal; mainly used to prevent the leakage of lubricating oil inside the chassis and improve the service life of lubricating oil;

The oil drain plug is mainly used to release dirty oil and cleaning oil when changing lubricating oil;

The oil standard cover is mainly used to observe whether the oil in the casing of the worm gear reducer is up to standard;

The main functions of the worm reducer are:
1. Decrease speed while increasing output torque.The torque output ratio is multiplied by the motor output multiplied by the reduction ratio, but be careful not to exceed the rated torque of the reducer.
2. The deceleration also reduces the inertia of the load, that is, the square of the deceleration ratio.It can be seen that the general motor has an inertia value.
The basic structure of the worm gear reducer is mainly composed of transmission parts, worm gears, shafts, bearings, boxes and accessories.It can be divided into three basic structural parts: box body, worm gear, bearing and shaft combination.The case is the basis of all accessories in the worm gear reducer.It is an important accessory to support and fix the shafting parts, ensure the correct relative position of the transmission parts, and support the load acting on the reducer.The worm gear is mainly used to transmit motion and power between two interlaced shafts, and the bearings and shafts are mainly used to transmit power, operation and improve efficiency.

FEEDBACK

Food Grade Gearbox Specification: Washdown, Lubricant and Material Rules

Structural principles and Selection key points of planetary reducer: how to determine the speed ratio, series and backlash - Hangzhou Weigao Transmission

Worm Gearbox Wear and Backlash Restoration: Repair or Replace?

Reducer maintenance starts from the running-in period: new machine running-in, temperature rise observation and first oil change specifications - Hangzhou Weigao Transmission

Industrial Gearbox Market 2027: Retrofit, Rebuild and Energy Upgrade Demand