What is the reason why the reducer shakes and vibrates heavily after the KA129-Z39 reducer is turned on?

Publish Time: 2026-10-16     Origin: Site

1. Installation and connection failures

‌Coupling misalignment‌: The axis deviation or angular deviation between the motor and the reducer exceeds 0.1mm, and the torque transmission is uneven, resulting in periodic power frequency vibration, and the axial amplitude will be significantly higher.

‌Loose anchor bolts‌: The position of the reducer deviates during operation, the transmission stability is destroyed, the vibration fluctuates significantly with the load, and the vibration value in the vertical direction is significantly larger.

‌Loose connecting parts‌: The coupling fastening screws and the input and output shaft locking sleeves are not locked, there is a gap impact in the transmission, and there will be obvious jitter the moment the machine is turned on.

2. Damage to internal transmission components

‌Bearing abnormality‌: Bearing raceway pitting, rolling elements damaged, radial clearance exceeding 15% of the original size, rotational friction resistance increases sharply, typical bearing characteristic frequencies will appear in the frequency spectrum, accompanied by abnormal noise.

‌Gear pair failure‌: The tooth surface is severely worn, the teeth are broken, the meshing backlash exceeds the standard, the transmission stability is destroyed, and periodic meshing shock is generated. The vibration frequency is directly related to the number of gear teeth.

‌Loose internal parts‌: axial movement occurs in gears, bearing seats and other components, collision and friction occur during operation, and the vibration will rapidly amplify over time.

3. Foundation and Rigidity Issues

‌The installation foundation is not firm‌: The rigidity of the base is insufficient, the pad iron layout is unreasonable, the whole unit shakes during operation, and even causes system resonance, and the amplitude remains high after starting up.

‌Insufficient frame rigidity‌: The mounting bracket of the KA series right-angle reducer is not rigid enough, elastic deformation occurs under load, and the vibration will be reversely amplified and transmitted to the box.

4. Abnormal load and working conditions

‌Load overload or large fluctuations‌: The actual load exceeds the rated value by more than 15%, or the load of the driven back-end equipment (such as mixing and conveying devices) suddenly changes, and the reducer is subjected to impact loads and causes jitter.

‌Dynamic balance failure‌: The input side coupling, pulley or motor rotor balance block falls off, and the remaining unbalance exceeds the standard, producing obvious power frequency horizontal vibration.

FEEDBACK

Marine Deck Winch Gearbox Selection: Drum Torque, Duty Class and Holding Brake

How to calculate the temperature rise of reducer oil: Power loss decomposition and thermal balance check calculation example - Hangzhou Weigao Transmission

What specific damage will reversal with load cause to the BWY27-59-4KW cycloidal pinwheel reducer?

How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal

Desalination Plant Gearbox Market 2027: SWRO Pump Drive Demand