How to avoid XLED32-841-0.37KW cycloidal pinwheel reducer with load reversal

Publish Time: 2026-11-14     Origin: Site

1. Prevent malfunction of the source on the electronic control side

After wiring the three-phase motor, first disconnect the coupling between the reducer and the load, jog the motor separately to verify the direction of rotation, and then connect the transmission chain after confirming forward rotation to avoid direct reverse rotation with load if the phase sequence is reversed.

A ‌phase sequence protector‌ is installed on the power supply circuit. When the phase sequence is reversed or a phase is missing, the power supply is directly cut off and the alarm is issued, thereby locking out incorrect steering at the circuit level.

In the frequency conversion/servo drive system, the steering-related parameters are locked and the modification password is set, and non-professionals are prohibited from adjusting the steering logic at will.

2. Forced anti-reversal pocket on the mechanical side

This model of cycloidal pinwheel reducer does not have self-locking ability. In working conditions such as lifting and conveying where external forces are prone to reverse drag, a backstop must be installed to completely lock the possibility of reverse rotation of the output shaft from the mechanical structure.

You can also directly use a matching motor with an electromagnetic brake. The brake will lock the input shaft at the moment of shutdown, completely eliminating reverse rotation caused by the load dragging backwards.

Regularly check the wear of couplings and flat keys to avoid slipping of transmission parts and causing the load side to reversely drive the reducer to reverse rotation.

3. Installation and operating condition control

During installation, use a level to calibrate the base of the reducer. The level error is controlled at ≤0.1mm/m. Use the diagonal stepwise tightening method to tighten the anchor bolts to avoid transmission abnormalities caused by base displacement during operation.

Strictly control the actual load within the range of 70% to 90% of the rated value, prohibit long-term overload operation, and avoid the load potential energy from dragging the reducer in reverse after a heavy load shutdown.

Clear forward-turn arrow signs are posted on the input and output shafts and couplings, and steering operation SOPs are posted next to the equipment to avoid human misjudgment of steering during wiring and operation after maintenance.

FEEDBACK

Apron Feeder Gearbox Selection: Chain Pull, Shock Load and Service Factor

How to determine the two-stage speed ratio of the cycloidal pinwheel reducer: how to read the combination table, how to check it, and how to find the frame number - Hangzhou Weigao Transmission

In addition to high temperature environments, what are the application precautions for R series gear reducers in other special environments?

How does the R series helical gear reducer perform in a strong vibration environment Selection

Pneumatic Conveying Gearbox Market 2027: Blower, Airlock and Screw Drive Demand