What is the function of a car gearbox?

Publish Time: 2021-09-07     Origin: WGT.

The automotive gearbox can change the transmission ratio, expand the range of driving wheel torque and speed to adapt to frequently changing driving conditions, and make the engine work under favorable conditions (high speed and low fuel consumption); in addition, when the rotation direction of the engine When left unchanged, the vehicle can be driven in reverse; the transmission can also use a neutral gear to interrupt power delivery, allowing the engine to start and idle, and facilitate transmission shifts or power delivery.As an important device in the car transmission system, the speed and output torque of the car can change in a wide range, but the torque and speed output by the piston engine used in the car cannot reach this change range, so in this case, adding the transmission to the car transmission system to facilitate the owner's switching to low and high speed drives during vehicle use.Since the car gearbox is very important, please pay more attention to car maintenance.
Transmission maintenance is the most complex vehicle restoration system.A new gearbox costs at least tens of thousands of yuan, and at most at least more than 100,000 yuan.Because car owners have little knowledge about maintenance, generally small maintenance shops like to buy some cheap gears to deceive car owners.In addition to the owner with a refurbished gearbox, the maintenance cost of the gearbox is also relatively confusing.Industry insiders said that due to the high cost of replacing a new gearbox, many consumers choose to repair it, but in fact, many gearbox failures cannot even be repaired by some 4S shops.Due to the difficulty of maintenance and the fact that this piece remains a consumer blind spot, repairers often cite Will.Therefore, once there is a problem with the gearbox, it must be repaired in a repair shop with a large number of professional technicians and a full set of original accessories and tools to ensure the maintenance quality of the gearbox.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission