What are the common problems of worm reducer

Publish Time: 2021-09-17     Origin: 威高传动

Worm gear reducers are widely used, but there are also many problems.What are the common problems of worm reducer?How to solve the problem?Next, Zhejiang Xinghai Reducer Co., Ltd. will analyze and solve it for you.
1. The reducer heats up and leaks oil.In order to improve the efficiency of the worm gear reducer, the worm wheel is generally made of non-ferrous metal, and the worm is made of hard steel.Due to the sliding friction transmission, high heat will be generated during operation, resulting in the difference in thermal expansion between the various parts of the reducer and the seal, resulting in gaps between the mating surfaces, and the oil will become thinner due to temperature rise, which will easily cause leakage.There are four main reasons: first, whether the material matching is reasonable; second, the surface quality of the meshing friction surface; third, whether the selection and addition of lubricating oil are correct; fourth, the assembly quality and the use environment.
2 Worn worm gear.Worm gears are generally made of tin bronze.The supporting worm material is generally quenched with 45 steel to hrc45-55, 40C: quenched hrc50-55 is also commonly used.It is ground to roughness.8 FCM by worm grinder.When the reducer is in normal operation, the worm is like a hardened 'file', constantly filing the worm gear, causing the worm gear to wear.Generally speaking, this wear is very slow.Just like some reducers in the factory, it can be used for more than 10 years.If the wear speed is fast, it is necessary to consider whether the Selection of the reducer is correct, whether there is overload operation, the material of the worm gear, the assembly quality or the use environment.
3. The transmission pinion is worn out.It usually occurs on a vertically installed reducer, and it is mainly related to the amount of lubricating oil added and the selection of lubricating oil.When installed vertically, it is easy to cause insufficient lubricating oil.When the reducer stops running, the transmission gear oil between the motor and the reducer will be lost, and the gears will not be properly lubricated and protected, and will not be effectively lubricated during startup or operation, resulting in mechanical wear or even damage.
4. The worm gear bearing is damaged.When the worm gear reducer fails, even if the reducer is well sealed, the factory often finds that the gear oil in the reducer has been emulsified, and the bearings have been rusted, corroded, and damaged.This is because the gear oil is formed by the condensation of water generated after heating and cooling during the operation and shutdown of the reducer; of course, it is also closely related to the quality of the bearing and the assembly process.

FEEDBACK

What are the common causes of failure of NGW102-6 planetary reducer bearing components?

What are the repair methods after the NGW81-25 planetary reducer bearing assembly fails?

How to judge whether there is a problem with the internal transmission pair of WP series reducer

What may be the causes of load fluctuations of WP series worm gear reducer?

Test the load before reducing the reducer Selection: on-site collection method of current, speed and load spectrum - Hangzhou Weigao Transmission